Use the CDJ300 in conjunction with a handheld router to create a variety of elegant joints.

Enables mortise & tenons and dowel joints to be cut with a router.Material thickness min. 12 mmMaterial thickness max. 47 mmTenon thickness min. 4.8 mmTenon thickness max. 16 mmTenon width max. using vertical...

A large rigid router table insert plate for incorporation into user-made router tables.Plate size 306 mm x 229 mm x 9.5 mm.Max router weight 8 kgMax router base dia 200 mm

A solid laminate sub base which is suitable for the Triton TRB001 and MOF001 routers.Diameter 170 mmThickness 8 mmThis product includes: 1 x Sub base1 x Template Guide Bush1 x 1/2" Line-up pin1 x 1/4"...

A large 1 metre long bladed T-square for use with a router.Blade has two parallel edges to allow a router to run on both edges.Allows a router to rout an edge square.The butt has two M5 tapped holes for...

This router compass is used for cutting circles & arcs from 100mm up to 610mm radius.

Access to pipes & cables beneath chipboard floors in seconds.Shank Diameter 1/2 inchFloor thickness 22 mmAccess hole diameter 250 mmMax. load capacity 200 kgThis product includes:1 x Routabout template3...

Access to pipes & cables beneath chipboard floors in seconds.Shank Diameter 1/4 inchFloor thickness 18 mmAccess hole diameter 250 mmMax. load capacity 200 kgThis product includes: 1 x Routabout template3...

Made from solid laminate provides an instant means of squaring off, marking out, setting up jigs etc.Overall length 703 mmBlade length 645 mmBlade thickness 3 mmBlade width at butt 70 mmBlade width at...

This guide rail features stable extension due to the VEL connector for stable and quick connection of guide rails, whilst the rails are exactly straight, even when the rail is extended, due to self-aligning...

This guide rail provides precise guidance, rails are exactly straight, even when the rail is extended, due to self-aligning connecting piece. Safe operation – anti-splinter guard for clean cut edges and...

This is a practical system accessory for aligning the guide rail on the workpiece precisely and at accurate angles.

These caps are designed to protect the ends of the rails and to ensure that the machine cable glides smoothly over the end of the rail.

These clamps are designed for speedy, reliable clamping of the guide rail on the workpiece.