Replacement collet nut.

Made from solid laminate provides an instant means of squaring off, marking out, setting up jigs etc.Overall length 703 mmBlade length 645 mmBlade thickness 3 mmBlade width at butt 70 mmBlade width at...

Designed to enable virtually any router to cut ellipses and circles. Used for corner tables, arches, desks and mirrors.Setting-up and operating is simple and effective, as proven by existing industrial...

A pair of extension rods for the Trend Eclipse jig, 500mm long for extra large ellipses & circles.

A two-part aluminium hinge jig portable template set designed for recessing hinges in wooden doors & frames. It is easy to use with minimal setting-up time, completing the job both accurately & quickly....

Contractor jig with interchangeable templates for use with a plunge router to cut the mortise & face-plate for larger locks quickly & accurately.Adaptor plate included to allow smaller templates (239mm...

Can be used on both inside and outside doors, and on maximum 25mm thick fixed stops.

Clear plastic letter templates for writing words for signs including house names. The templates are used with a 13mm guide bush and 8mm diameter cutter.

Allows grooves and tenons to be cut using a router.Working length based on 30 mm guide bush and 12 mm diameter cutter being used:-Max. without end stops used 412 mmMax. with one end stop used 397 mmMax....

Use the CDJ300 in conjunction with a handheld router to create a variety of elegant joints.

Use the CDJ600 in conjunction with a handheld router to create a variety of elegant joints.

This template jig is a well proven means of routing out stair housings quickly and accurately.Tread Thickness 22-32 mmSlider Diameter 30 mmNosing Adjustment 16-19 mmLength 858 mmHeight 485 mmWidth 9.5...

Cuts neat, circular holes in chipboard floors allowing access to pipes & cables beneath in seconds.Shank Diameter 1/2 inchFloor thickness 18 mmAccess hole diameter 250 mmMax. load capacity 200 kgThis product...

A large 1 metre long bladed T-square for use with a router.Blade has two parallel edges to allow a router to run on both edges.Allows a router to rout an edge square.The butt has two M5 tapped holes for...

This router compass is used for cutting circles & arcs from 100mm up to 610mm radius.