This specially designed, single sided swinging arm spanner can be used with or without a 3/8"drive wrench. The tool allows the adjustment of the drive chain on motorcycles fitted with single sided swinging...

This product is fully adjustable and can be used on a variety of engines.

Part of Laser's comprehensive motorcycle range, this easy to use 'Ride In' motorcycle stand/wheel chock is vital for safe working on motorcycles of varying sizes. Suitable for use with motorcycles fitted...

This tool is designed to offer 6 different sizes for the Flywheel wheel rings on motorcycles. These tapered lock type rings cannot be removed without the use of this specialised tool.

A set of flywheel pullers used to separate flywheel from the crankshaft taper. Supplied in a labelled blow storage case.

Suitable for removing tyres on motorcycles or leisure vehicles.

This tool has been designed with four stepped sizes to fit the spindle on most modern motorcycles. For use with any 3/8"drive tool or with a standard socket, it's suitable for use on Honda, Kawasaki, Suzuki,...

Fork seals should be replaced at the first sign of oil appearing on the stanchion tubes' legs visible when the forks travel. If the leak is allowed to continue the oil will run down the back of the fork...

The Laser Motorcycle Piston Ring Tool Set sizes range from 40 to 85mm and is complete with 4 bands to fit most engines. Helps to prevent piston ring damage during installation.

Designed to reduce the risk of damaging the motorcycle wheel rims when fitting or removing tyres

A clamp on cable oiler for use with spray type oil or silicone spray on Motorcycle cables

This Motorcycle coil spring compressor is an essential motorcycle service tool and a great time saver. It comes complete with 4 adaptors, which allows this particular tool to be used on a wide range of...

This bearing press is designed for the correct installation of bearings on various makes and models of motorcycles. With seven adapters, for various bearing sizes and the ability to install bearings from...

The Gunson 77130 Garage Drip Mats are 100cm x 80cm. They are ideal for absorbing a variety of liquids that could drip during garage operations. These mats will absorb oil, brake fluid and water. Each mat...