Makita DLX2455TJ 18V LXT 2 Piece Combo Kit with 2 x 5Ah Batteries, Charger & MakPac Case

The DLX2455TJ is a compact and lightweight cordless and brushless Combo Kit, comprising DHP486Z 18V LXT Combi Drill and DTD172Z 18V LXT Impact Driver, complete with 2 x 5.0 Ah batteries and fast charger, supplied in a Makpac Case.

The DHP486Z and DTD172Z are powered by 18V Li-ion LXT slide type battery, to supply energy to the powerful 18V brushless motor. The DHP486Z is a Combi Drill, with variable speed controlled by trigger and 2 mechanical gears, to deliver 0 to 550 rpm on low speed and 0 to 2,100 rpm on high speed, 0 to 8,250 blows per minute on low speed and 0 to 31,500 blows per minute on high speed and a maximum fastening torque 65 Nm soft joint and 130 Nm hard joint for a wide range of drilling, fastening and hammer drilling applications.

The DHP486Z is equipped with electric brake, forward and reverse rotation, all metal gear construction, metal gear housing, 2 mechanical gears and 21 torque settings plus drill mode. The DHP486Z is fitted with twin LED job lights, single sleeve keyless chuck for quick and easy bit installations and removals with one hand and depth gauge for drilling consistency. Maximum capacity in wood 76mm, masonry 16mm, steel 13mm.

The DTD172Z is an Impact Driver with an overall length of 114mm and slim tool head to enable easy screw driving in tight corners and confined spaces, with variable speed controlled by trigger to deliver 0 to 3,800 blows per minute (maximum), 0 to 2,600 blows per minute on medium and 0 to 1,100 blows per minute on low, 290 W maximum output and 180 Nm maximum fastening torque.

The DTD172Z is equipped with electric brake, electronic 4 stage impact power selection, anti bit-wobbling structure, reverse switch, quick mode switching button and one touch bit installation. The DTD172Z is fitted with a 6.35mm / ¼” hex driving shank and twin LED job lights. Capacity standard bolt M5 to M16, high tensile bolt M5 to M14, machine screw M4 to M8, coarse thread (length) 22 to 125mm.

The DHP486Z and DTD172Z both feature battery protection circuit designed to protect the battery from damages due to overheating, over-discharge and overload current. The DHP486Z and DTD172Z are not compatible with G-Series batteries.