BASKET
0You have 0 items in your basket.
VAT total | £0.00 |
Total Goods (inc VAT) | £0.00 |
This system sets the standard for affordable brake and clutch bleeding systems. Using air pressure from an inflated spare tyre, it will effortlessly bleed hydraulic systems
This universal clutch alignment tool is for easy alignment of single clutch plates and it is suitable for flywheels too.
Simplifies the job of replacing vehicles clutches by accurately aligning clutch plates and pilot bearings.
This Draper 11 Piece Set allows for fast accurate alignment of flywheel pilot hole with clutch drive plate when assembling to vehicles. Supplied with eight precision manufactured steel bushes and three...
Fully adjustable opening with 4mm diameter pin face wrench, ideal for locking discs onto angle grinders. This tool is also suitable for locking plates found on later VAG models with SAC clutches.
This Facom Vacuum brake bleeder operates by the Venturi principle and can contain up to four litres of fluid. This particular model operates at a pressure of 6-10 bars and is designed for use on brake...
This revolutionary tool makes quick work of accurately aligning the clutch and pressure plate before fitting.
Two piece set of centring mandrels for clutches.
Designed for Direct Shift Gearboxes (DSG) 7 speed dual clutch gearboxes fitted to VAG vehicles.
The Laser 6040 Clutch Alignment Tool For The Land Rover Defender has been specially designed to hold the clutch centre plane centrally on the flywheel so you can fit the clutch cover plate.
The Laser 6661 is part of the Laser range of clutch removal tools and is for 6 speed DCT dual clutch transmission. This tool is compatible with the Volvo C30, C70 (06>) S40 (04>) S60 (11>) S80(07>) S80L,...
The Laser 6718 is a DSG clutch removal tool set for VAG 7 speed gear boxes, found in Volkswagen Golf/Touareg and Audi A3 vehicles. This tool is compatible with the Volkswagen Golf 2004 onwards, Tourareg...
The SAC clutch mandrel kit for centering the clutch disc on the flywheel, while installing self adjusting clutch suitable for BMW vehicles. This tool can also be used to align new and previously pre-tensioned...
The Laser 6895 is a freewheel mechanism tool for BMW/Mercedes Benz for inactive intelligent servo module special design for both brands. Developed to allow the BMW and Mercedes Benz vehicles listed to...
The clutch bearing gauge block for use on DSG gearboxes in the Volkswagen Audi models. This unit is compatible with:Application: DSG (7 speed) gearboxes found in the Volkswagen/Audi ranges (VAG) from 2011...
© Machine Mart 2024, All rights reserved.
Machine Mart Ltd 211 Lower Parliament Street, Nottingham NG1 1GN
Sorry, a problem occurred with the server. Please try again later.
Thank you, you will be emailed when this product comes back in stock.
Enter your email below to receive immediate notification when this item is back in stock.
Please enter an email address.
Please enter a valid email address.