BASKET
0You have 0 items in your basket.
VAT total | £0.00 |
Total Goods (inc VAT) | £0.00 |
This Brake Bleeder and Vacuum Pump Kit is a mutli use testing tool for fuel, transmission, ignition and emissions systems. Manufactured from high quality materisl it features a steel handle with rubberised...
This disc brake piston spreader is designed for the separation of brake caliper pistons for the installation of new brake pads. Their design ensures the pistons are retracted and released squarely to avoid...
This system sets the standard for affordable brake and clutch bleeding systems. Using air pressure from an inflated spare tyre, it will effortlessly bleed hydraulic systems
Can be easily used with the pipe in position on the vehicle etc. and can be used on copper, brass and aluminium tubing. Produces male, female and double flares on 5mm to 16mm diameter pipes/tubes.
This tool is specifically designed for use on Citroen, Ford and Renault vehicles with brake calipers with a left handed threaded piston. A great time saving tool.
When pressure bleeding brakes and clutch hydraulic systems, it is essential to prevent fluid and air being pulled back into the system via the bleed nipple when the pedal or lever is released. The Laser...
This simple and effective tester shows the condition of brake fluid with a coloured response. Green indicates brake fluid is 1.5% water and Ok, whilst red indicates 3% water and fails the test. It has...
Handy set perfect for checking brake pad thickness. This set includes 3 colours which denote the wear Red: pad must be replaced immediately, Yellow: pad is becoming thin, Green: pad is in good working...
A Chrome Molybdenum pipe bender for making tidy bends in brake pipes.
The compact design of this new brake pipe flaring tool from Laser means that it is particularly suited to on-vehicle use, making it very convenient and a real time saver. Under a wheel arch or even underneath...
A simple tool for testing the percentage of water in brake fluid. Essential for regular safety checks on your brakes.
Made up of a pair of small hose clamps the 7154 clamp kit is ideal for use on flexible non-braided brake hoses, fuel hoses, oil lines & vacuum hoses. This product is ideal for use on motor-cycles, cars...
Makes bleeding brakes a simple, single person job.
The Laser brake bleeder is a 6 piece wrench set with 6 piece sizes of 7,8,9,10,11,12mm. This set is colour coded for added convenience and features a 1.2mm silicon hose and check valve.Completing this...
The Laser 6971 brake pipe bending tool can bend 3/16" and 1/4" brake and fuel lines. This pair of pliers has dipped handles for added grip and comfort while using.
© Machine Mart 2024, All rights reserved.
Machine Mart Ltd 211 Lower Parliament Street, Nottingham NG1 1GN
Sorry, a problem occurred with the server. Please try again later.
Thank you, you will be emailed when this product comes back in stock.
Enter your email below to receive immediate notification when this item is back in stock.
Please enter an email address.
Please enter a valid email address.