This system sets the standard for affordable brake and clutch bleeding systems. Using air pressure from an inflated spare tyre, it will effortlessly bleed hydraulic systems

When pressure bleeding brakes and clutch hydraulic systems, it is essential to prevent fluid and air being pulled back into the system via the bleed nipple when the pedal or lever is released. The Laser...

This simple and effective tester shows the condition of brake fluid with a coloured response. Green indicates brake fluid is 1.5% water and Ok, whilst red indicates 3% water and fails the test. It has...

A Chrome Molybdenum pipe bender for making tidy bends in brake pipes.

The compact design of this new brake pipe flaring tool from Laser means that it is particularly suited to on-vehicle use, making it very convenient and a real time saver. Under a wheel arch or even underneath...

A simple tool for testing the percentage of water in brake fluid. Essential for regular safety checks on your brakes.

Made up of a pair of small hose clamps the 7154 clamp kit is ideal for use on flexible non-braided brake hoses, fuel hoses, oil lines & vacuum hoses. This product is ideal for use on motor-cycles, cars...

Makes bleeding brakes a simple, single person job.

The Laser brake bleeder is a 6 piece wrench set with 6 piece sizes of 7,8,9,10,11,12mm. This set is colour coded for added convenience and features a 1.2mm silicon hose and check valve.Completing this...

The Laser 6971 brake pipe bending tool can bend 3/16" and 1/4" brake and fuel lines. This pair of pliers has dipped handles for added grip and comfort while using.

This easy to use tool is suitable for use on a wide range of brake calipers from brands such as ATE, Bendix, Delco and Girling. The tool separates brake pads with minimum effort, allowing for quick and...

This essential service tool from Laser is manufactured specifically for use on Volkswagen Audi Group (VAG) models which are fitted with electronic parking brakes. This piston wind back tool must be used...

This brake calliper wind back tool kit is complete with an air tool. It is a new product which assists this essential servicing procedure. The air tool may also be used separately with other products.0...

For use with pneumatic/air tools for brake caliper wind back tools with either pin type or 3/8" D type drives.

The Laser Flaring Tool kit is a comprehensive, yet simple to use kit, suitable for cutting and flaring copper, brass and thin walled aluminium tubing. Cuts tube from 3mm dia to 30mm and pipe 5mm to 16mm....