This Brake Bleeder and Vacuum Pump Kit is a mutli use testing tool for fuel, transmission, ignition and emissions systems. Manufactured from high quality materisl it features a steel handle with rubberised...

This disc brake piston spreader is designed for the separation of brake caliper pistons for the installation of new brake pads. Their design ensures the pistons are retracted and released squarely to avoid...

This system sets the standard for affordable brake and clutch bleeding systems. Using air pressure from an inflated spare tyre, it will effortlessly bleed hydraulic systems

Can be easily used with the pipe in position on the vehicle etc. and can be used on copper, brass and aluminium tubing. Produces male, female and double flares on 5mm to 16mm diameter pipes/tubes.

This tool is specifically designed for use on Citroen, Ford and Renault vehicles with brake calipers with a left handed threaded piston. A great time saving tool.

When pressure bleeding brakes and clutch hydraulic systems, it is essential to prevent fluid and air being pulled back into the system via the bleed nipple when the pedal or lever is released. The Laser...

A Chrome Molybdenum pipe bender for making tidy bends in brake pipes.

Handy set perfect for checking brake pad thickness. This set includes 3 colours which denote the wear Red: pad must be replaced immediately, Yellow: pad is becoming thin, Green: pad is in good working...

This simple and effective tester shows the condition of brake fluid with a coloured response. Green indicates brake fluid is 1.5% water and Ok, whilst red indicates 3% water and fails the test. It has...

This Brake Flaring Tool Set is designed to be used in conjunction with a bench vice. The set comprises of 4 sizes of clamping blocks for holding the brake pipes (3/16”(4.75mm), ¼”, 5/16” & 3/8”) The Turn...

One-man pressure brake and clutch bleeding system suitable for the professional workshop. Low pressure tank (20-40psi) can be pre-charged with compressed air, making the unit fully portable. Large reservoir...

This set helps to locate problems relating to commercial vehicle air brake pressure quickly and easily. The three gauges provide more accurate diagnosis when testing and locating faults along the braking...

MOT Approved tool, which simplifies vehicle testing by allowing any test that requires the brakes to be applied to be carried out by one person rather than two.

The Laser 6084 is a 3 piece kit designed to allow a Dial Test Indicator (DTi) gauge to be mounted securely in position against the brake disc to measure disc warp. This kit is ideal for the measurement...

Makes bleeding brakes a simple, single person job.