BASKET
0You have 0 items in your basket.
VAT total | £0.00 |
Total Goods (inc VAT) | £0.00 |
This Brake Bleeder and Vacuum Pump Kit is a mutli use testing tool for fuel, transmission, ignition and emissions systems. Manufactured from high quality materisl it features a steel handle with rubberised...
The Clarke PRO336 Brake Caliper Piston Rewind Tool is supplied with a double sided adaptorwhich isdesigned to be used on right handed rear calliper pistons.
This disc brake piston spreader is designed for the separation of brake caliper pistons for the installation of new brake pads. Their design ensures the pistons are retracted and released squarely to avoid...
Convenient double ended tool for use on left or right handed rear calliper pistons.
This system sets the standard for affordable brake and clutch bleeding systems. Using air pressure from an inflated spare tyre, it will effortlessly bleed hydraulic systems
Can be easily used with the pipe in position on the vehicle etc. and can be used on copper, brass and aluminium tubing. Produces male, female and double flares on 5mm to 16mm diameter pipes/tubes.
This tool is specifically designed for use on Citroen, Ford and Renault vehicles with brake calipers with a left handed threaded piston. A great time saving tool.
When pressure bleeding brakes and clutch hydraulic systems, it is essential to prevent fluid and air being pulled back into the system via the bleed nipple when the pedal or lever is released. The Laser...
This four piece flexi flare nut spanner set is constructed of mirror finished chrome vanadium and includes different sized wrenches making it ideal for various applications.Each spanner features one flexible...
A Chrome Molybdenum pipe bender for making tidy bends in brake pipes.
Handy set perfect for checking brake pad thickness. This set includes 3 colours which denote the wear Red: pad must be replaced immediately, Yellow: pad is becoming thin, Green: pad is in good working...
This simple and effective tester shows the condition of brake fluid with a coloured response. Green indicates brake fluid is 1.5% water and Ok, whilst red indicates 3% water and fails the test. It has...
This Brake Flaring Tool Set is designed to be used in conjunction with a bench vice. The set comprises of 4 sizes of clamping blocks for holding the brake pipes (3/16”(4.75mm), ¼”, 5/16” & 3/8”) The Turn...
The Laser 6084 is a 3 piece kit designed to allow a Dial Test Indicator (DTi) gauge to be mounted securely in position against the brake disc to measure disc warp. This kit is ideal for the measurement...
Makes bleeding brakes a simple, single person job.
© Machine Mart 2024, All rights reserved.
Machine Mart Ltd 211 Lower Parliament Street, Nottingham NG1 1GN
Sorry, a problem occurred with the server. Please try again later.
Thank you, you will be emailed when this product comes back in stock.
Enter your email below to receive immediate notification when this item is back in stock.
Please enter an email address.
Please enter a valid email address.