BASKET
0You have 0 items in your basket.
VAT total | £0.00 |
Total Goods (inc VAT) | £0.00 |
This freewheel remover fits 5 to 10 speed Shimano freewheels, allowing for their quick and easy removal so that wheel bearings and axles can be accessed
Set of 3 compact aluminium tyre levers, for road side repairs as well as general workshop use. The narrow profile makes them easy to slide in and hook underneath the tyre. The spoke hook end allows the...
Required for tightening or loosening spoke nipples, a spoke wrench allows for the tension in the wheel spokes to be adjusted so that the wheel runs straight and true. This wrench fits 8 different sized...
This handy tool is essential for bicycle maintenance, allowing for quick and easy removal/refitting of bicycle freewheels with Shimano gearing.
These L shaped Star* Keys each feature a long shaft with a ball end tip allowing for greater access. The set includes sizes T10, T15, T20, T25, T27, T30, T40, T45, T50, which are colour coded allowing...
This 14" shock absorber pump with 300psi and micro adjust button is simple and easy to use and is manufactured for adjusting air pressure in suspensions systems fitted to mountain bikes.
For use when having to guide new cables through an internally routed frame, this kit uses magnets to make light work of a task that can be both time-consuming and frustrating. It comes supplied with adaptors...
A Wera Bicycle tool set containing profiles and sizes suited for bicycle applications, all stored in a practical pouch. Included in this set is Wera's staple Kraftform handle; designed to perfectly fit...
A 15mm pedal wrench, with super slim profile and long handle, for removing pedals on most modern bicycles. It's slim enough to fit comfortably between the pedal body and crank arm, minimising marking or...
Disc brake tool combining two different functions to ensure that brake rotors can run freely and quietly through the caliper. At one end is a rotor truing fork, with two different length slots allowing...
Combines a 15mm pedal wrench for removing the pedals on the majority of most modern bicycles, 16mm box spanner, and a chain whip for use when removing and installing sprockets/cassettes. Also known as...
Typically 5mm thinner than a regular spanner, cone nut spanners slide between the hub and the axle locking nut, onto the cone nut to allow for the hub bearings to be correctly adjusted. This set of cone...
This headset cup removal tool allows for the quick, easy and safe removing of bearing cups from a bicycle frame. It is designed to slide through the frame until the sprung end engages onto the top of the...
Allows for the quick and easy installation of press fit bottom brackets without risking damage to the frame. The stepped plates clamp either side of the axle allowing the force screw to be turned, pressing...
Used to install or remove bearing bottom brackets on the majority of bikes fitted with 16-notch external bearing threaded cups. The splines engage securely onto the bottom bracket notches allowing for...
© Machine Mart 2024, All rights reserved.
Machine Mart Ltd 211 Lower Parliament Street, Nottingham NG1 1GN
Sorry, a problem occurred with the server. Please try again later.
Thank you, you will be emailed when this product comes back in stock.
Enter your email below to receive immediate notification when this item is back in stock.
Please enter an email address.
Please enter a valid email address.