Japanese Industrial Standard screwdriver kit – T-Handle with 6 magnetic bits.For use on Japanese industrial standard screws fitted to classic Japanese motorcycles / cars / bicycles / equipment. The use...

For use when fitting, shortening or tidying up gear and brake cables. These cutters feature hardened triangular jaws to give a clean and precise cut, to help prevent the cable fraying, allowing the end...

Set of 3 compact aluminium tyre levers, for road side repairs as well as general workshop use. The narrow profile makes them easy to slide in and hook underneath the tyre. The spoke hook end allows the...

For use when removing and installing sprockets and cassettes. A chain whip, also known as a sprocket remover or a sprocket holder, is used to hold the cogs on the rear wheel in place as a lockring tool...

Recommended for use when lacing spokes into a bicycle wheel, this spoke nipple driver allows for nipples to be fitted and tightened through the wheel rim at speed due to its clever cranked design. The...

This freewheel remover not only a fits Shimano freewheels, allowing for their quick and easy removal so that wheel bearings and axles can be accessed, but it is also suitable for use on Campagnolo Cassette...

For the installation and removal of the lockring on both Shimano HG and SRAM cassettes, when used together with a 24mm spanner or socket and a cassette holding tool or chain whip. It can also be used on...

Required for tightening or loosening spoke nipples a spoke wrench, sometimes referred to as a spoke key, allows for the tension in the wheel spokes to be adjusted so that the wheel runs straight and true....

This chain wear indicator gauge should be used periodically to measure how much a chain has worn and stretched, ensuring it can then be replaced before it has caused any additional wear to the components...

Folding tool kit including a range of essential tools to carry out most road and trail side repairs. The ultra slim size of this alloy multi-tool means that it will easily fit into any saddle bag, back...

Designed to remove and refit both Schrader and Presta type valve cores, this tool is a must when adding tyre sealant, fitting a Presta valve extender or replacing a valve core. Despite its small diameter,...

A wheel alignment gauge (dishing tool), is essential for ensuring the wheel sits correctly in the frame or forks by allowing you to check that the rim is centred between the locking nuts on either side...

For use on 3/32” chains, this chain tool is used to remove and install chain rivets. Both the main handle and T-handle of the driver have a cushioned grip, so are comfortable to hold when applying the...

Misaligned frame and fork dropouts cause many ride problems, including bent axles or quick-release skewers, together with tracking and gear shifting issues, due to the wheels not being able to fit correctly....

Ideal for both the keen home or workshop mechanic, this spoke tension gauge belongs next to any wheel truing stand. For use when building, rebuilding, or truing a bicycle wheel, it accurately measures...