A 15mm pedal wrench, with super slim profile and long handle, for removing pedals on most modern bicycles. It's slim enough to fit comfortably between the pedal body and crank arm, minimising marking or...

Disc brake tool combining two different functions to ensure that brake rotors can run freely and quietly through the caliper. At one end is a rotor truing fork, with two different length slots allowing...

Combines a 15mm pedal wrench for removing the pedals on the majority of most modern bicycles, 16mm box spanner, and a chain whip for use when removing and installing sprockets/cassettes. Also known as...

Typically 5mm thinner than a regular spanner, cone nut spanners slide between the hub and the axle locking nut, onto the cone nut to allow for the hub bearings to be correctly adjusted. This set of cone...

This headset cup removal tool allows for the quick, easy and safe removing of bearing cups from a bicycle frame. It is designed to slide through the frame until the sprung end engages onto the top of the...

Allows for the quick and easy installation of press fit bottom brackets without risking damage to the frame. The stepped plates clamp either side of the axle allowing the force screw to be turned, pressing...

Used to install or remove bearing bottom brackets on the majority of bikes fitted with 16-notch external bearing threaded cups. The splines engage securely onto the bottom bracket notches allowing for...

Designed to access the narrow spaces behind the chainset, this low profile chainring nut spanner holds the nut still to prevent it from turning when tightening or loosening the chainring bolt using a Hex...

Badly adjusted or loose cone nuts can cause unnecessary wear and damage to both the wheel bearings and inner hub components. These super slim cone spanners allow for the cone nuts to be tightened hard...

For use when removing and installing sprockets and cassettes. A chain whip, also known as a sprocket remover or a sprocket holder, is used to hold the cogs on the rear wheel in place as a lockring tool...

This crank extractor is used for the correct removal of crank arms and chainsets that use a square-tapered, or splined ISIS Drive, bottom bracket. The threaded collar screws into the crank arm before the...

These pliers are perfect for removing bicycle chains that use a master link. Due to the way master links fit together, they are kept in place by the chain being pulled tight whilst pedalling. This combined...

This chain tool not only enables the removal of stubborn master chain links, but because it also features an extra jaw it allows for the link to be refitted and pulled into the closed position. Due to...

More stable than a basic chain whip tool, these cassette pliers have a spring loaded jaw to grip onto the sprocket and hold the cassette firmly while the lock ring is being loosened. For use with a cassette...

Set of 3 compact tyre levers, ideal for road and trail side repairs, as well as general workshop use. The narrow profile makes them easy to slide in and hook underneath the tyre. The spoke hook end allows...