A must for the keen home mechanic or workshop this truing stand holds the wheel firmly, allowing for free movement and adjustment. Designed to fit hubs with diameters of 100mm and 135mm, which are then...

Allows for the quick and easy installation of headset cups and press fit bottom brackets, without risking any damage to the frame. The stepped cup guides ensure the cups are correctly supported and sitting...

For the installation and removal of the lockring on both Shimano HG and SRAM cassettes, when used together with a 24mm spanner or socket and a cassette holding tool or chain whip. It can also be used on...

This freewheel remover not only a fits Shimano freewheels, allowing for their quick and easy removal so that wheel bearings and axles can be accessed, but it is also suitable for use on Campagnolo Cassette...

Fixes onto the drive side of the frame, in place of the rear wheel, keeping the chain tensioned and held away from the frame. The chain sits in a roller, which allows the cranks to be rotated, making this...

Used for the installation of a fork crown race, the lowest part of a headset. Ensures the race is correctly fitted and set, without causing damage to either the forks or the crown race and bearing surface....

Used for the installation of a fork crown race, the lowest part of a headset. Ensures the race is correctly fitted and set, without causing damage to either the forks or the crown race and bearing surface....

For use when fitting, shortening or tidying up gear and brake cables. These cutters feature hardened triangular jaws to give a clean and precise cut, to help prevent the cable fraying, allowing the end...

This freewheel remover fits 5 to 10 speed Shimano freewheels, allowing for their quick and easy removal so that wheel bearings and axles can be accessed

Set of 3 compact aluminium tyre levers, for road side repairs as well as general workshop use. The narrow profile makes them easy to slide in and hook underneath the tyre. The spoke hook end allows the...

Required for tightening or loosening spoke nipples, a spoke wrench allows for the tension in the wheel spokes to be adjusted so that the wheel runs straight and true. This wrench fits 8 different sized...

This handy tool is essential for bicycle maintenance, allowing for quick and easy removal/refitting of bicycle freewheels with Shimano gearing.

These L shaped Star* Keys each feature a long shaft with a ball end tip allowing for greater access. The set includes sizes T10, T15, T20, T25, T27, T30, T40, T45, T50, which are colour coded allowing...

This 14" shock absorber pump with 300psi and micro adjust button is simple and easy to use and is manufactured for adjusting air pressure in suspensions systems fitted to mountain bikes.

For use when having to guide new cables through an internally routed frame, this kit uses magnets to make light work of a task that can be both time-consuming and frustrating. It comes supplied with adaptors...