BASKET
0You have 0 items in your basket.
VAT total | £0.00 |
Total Goods (inc VAT) | £0.00 |
Amber welding screen manufactured to BS EN 1598. Suitable for use in workshops where the glare from welding and cutting may be a hazard to others. Curtain and frame supplied flat packed, but assembles...
This set is suitable for MIG, Arc & TIG welding and is rated at 200Amps. It is fitted with 10/25mm² Dinse Plug Connectors, making it compatible with any machine with that size sockets. The cable length...
Heat treated steel jaws with bright nickel plate finish. Knurled jaw adjustment screw with lever type release. Supplied in tool roll.
Quality electrode holder compatible with makes of Arc or TIG welders that have 10/25mm² sized Dinse sockets.
Cast iron welding vice to aid welding a 90° angle. Self centring swivel jaw allows two different size workpieces to be accurately welded. Copper plated spindle for resistance to weld spatter. Can be bench...
Cast iron welding vice to aid welding a 90° angle. Self centring swivel jaw allows two different size workpieces to be accurately welded. Copper plated spindle for resistance to weld spatter. Can be bench...
A handy and easy to use tool, designed to create 13mm deep, 20 gauge steps or flange in sheet metal, or 7mm holes if required. Ideal for panel replacement, patching and for plug welding preparation.
Easy to use, but very effective, these door skinning pliers are used to prevent damage to panels while crimping them, saving time and money.
This easy to use tool ensures you have the correct gas flow rate providing optimum gas shielding to the weld pool. Just insert the end of the MIG or TIG torch into the meter, press the torch trigger to...
This magnetic ground clamp benefits from a super simple set up, just place on a clean surface, connect earth and start welding. This unit means no more tacking on tabs or searching for grounds and it is...
The DRY 5.150R electrode oven is a mobile device in which coated electrodes are kept at high tempereture. Electrodes can absorb moisture whilst in storage & excess moisture can produce low quality, porous...
For use during MIG welding, these plug weld pliers from Power-Tec provide the user with even better weld penetration and don't allow burning through even thin panels when welding. They clamp and support...
Ideal tool set for welding around boot and window edges, door columns etc.
Ideal for cleaning spatter from the inside of MIG shrouds, cutting off excess wire at the tip before welding & unscrewing contact tips and torch shrouds.
'J' welding clamp, manufactured for use on flanged lap joints. With 0-15mm adjustment.
© Machine Mart 2024, All rights reserved.
Machine Mart Ltd 211 Lower Parliament Street, Nottingham NG1 1GN
Sorry, a problem occurred with the server. Please try again later.
Thank you, you will be emailed when this product comes back in stock.
Enter your email below to receive immediate notification when this item is back in stock.
Please enter an email address.
Please enter a valid email address.