This tool is designed for the rear bush on the front wishbone (Console bush) found on:Please see the Product Manual for full details. Download Product Manual

A set of four sub-frame alignment pins specifically designed for the Volkswagen Crafter.

Designed for pulling drive shafts into hubs or extracting the hubs on several manufacturer's vehicles

A telescopic spring compressor with universal use has a non-slip, three pronged arm feature for maximum grip. It is now possible to remove and replace the coil springs on the wishbone without dismantling...

Track rod (steering arm) remover and installer. Size range - 25mm to 35mm. length 400mm.

For the removal and refitting of the rear axle bushes on Renault Laguna (Mark II). OEM Ref 1751.

This universal bush and bearing removal tool is ideal for the service garage where various combination of tools are required. Supplied in a blow moulded case for storage this is a versatile set with 20...

This wheel bearing kit is an essential service tool for VAG (Volkswagen Audi Group) models fitted with 2nd generation wheel bearings. These second generation bearings can't be separated from the drive...

Wheel bearing lock nut socket specifically designed for the castellated lock nuts used to hold the wheel bearings in place on the rear axles fitted to RWD type 34 axles on Transit 80, 100, 115 and 120...

This time and effort saving tool is specifically designed for use with Ford Transit models manufactured from 2006 onwards. It is manufactured for the easy removal and repair of front wheel bearings. A...

This wheel bearing kit is an essential service tool for selected Ford, Mazda and Volvo models fitted with 78mm 2nd generation wheel bearings. These second generation bearings can't be separated from the...

This wheel bearing kit is an essential service tool for VAG (Volkswagen Audi Group) models fitted with 62 & 66mm 2nd generation wheel bearings. These second generation bearings can't be separated from...

This wheel bearing kit is an essential service tool for VAG (Volkswagen Audi Group) models fitted with 62, 66, 72 or 85mm 2nd generation wheel bearings. These second generation bearings can't be separated...

Clamp for strut insert pistons.

The Laser 6039 Bush Tool - For The Mitsubishi Evo 4/5/6 is for the lower wishbone/front bush. This tool is designed to extract and insert with no need to remove the ball joint fixings. **Please Note: When...