To increase gluing area producing a strong joint in drawer production.D 25.4 mmC 12.7 mm

For veining, panelling, 'V' grooving, bevelling & chamfering.D 1/2 inchD 12.7 mmC 7/16 inchC 13 mmC2 13 mmC3 11 mmA 60 degreesOverall length 53 mmShank Diameter 1/4 inch

For veining, panelling, 'V' grooving, bevelling & chamfering.D 1/2 inchD 12.7 mmC 1/2 inchC 13 mmC2 9 mmC3 6 mmA 45 degreesOverall length 53 mmShank Diameter 1/4 inch

Used for trimming plastic or plywood overlays.D 1/2 inchD 12.7 mmC 50 mmB 12.7 mmA 90 degreesOverall length 104.5Shank Diameter 1/2 inch

Profiler with shank mounted bearing guides.D 1/2 inchD 12.7 mmC 32 mmB 12.7 mmA 90 degrees

This dovetail cutter produces a tight reliable joint for drawers, boxes etc.D 1/2 inchD 12.7 mmC 1/2 inchC 12.7 mmOverall length 60.5 mmA 104 degreesShank Diameter 1/4 inch

Used for trimming plastic or plywood overlays.D 1/2 inchD 12.7 mmC 1 inchC 25.4 mmB 12.7 mmA 90 degreesOverall length 77 mmShank Diameter 1/4 inch

Used for trimming plastic or plywood overlays.D 1/2 inchD 12.7 mmC 1 inchC 25.4 mmB 12.7 mmA 90 degreesOverall length 79.5 mmShank Diameter 1/2 inch

For producing ovolo and rounding over edge moulds, using a side fence or back fence.D 1/2 inchD 12.7 mmC 23/64 inchC 9 mmR 4.8 mmOverall length 51.5 mmShank Diameter 1/4 inch

This cutter is for Trend Craft Dovetail Jigs.D 12.7 mmC 20 mmOL 60 mmA 98 degreesShank Diameter 1/4 inch

A two fluted cutter to give a clean finish to the cut edges.Use only on professional routers with 80mm deep plunge and suitable one piece multi-slit collet to ensure safe cutter retraction into base.D...

For coves and part of a rule joint with a 1/4" shank diameter.D 8 mmC 1/2 inchC 12.7 mmR 4 mmOL 46 mm

For coves and part of a rule joint with 1/2" shank diameter.D 12.7 mmC 19 mmR 1/4 inchR 6.3 mmOL 56 mm

Cutter for use with the Leigh Dovetail Jig.D 1/2 inchD 12.7 mmC 9.5 mmOL 57 mmA 108 degreesShank Diameter 1/4 inch

These cutters are for use with the Nutool and Axminster Power Tool Centre Dovetail Jigs.D 12.7 mmC 12.7 mmOverall length 63 mmB 12.7 mmA 104 degreesShank Diameter 1/4 inch