Gives a clean finish to abrasive materials such as chipboard, MDF, plywood and certain hardwoods.D 12 mmC 63 mmOL 115 mmShank Diameter 1/2 inchFor use with the Trend Lock Jig.

For housing, grooving and mortising. Features 2mm micrograin Tungsten Carbide tips, for cutting the most abrasive materials to give extra long life.D 1/2 inchD 12.7 mmC 25 mmOL 66 mmShank Diameter 1/2...

For housing, grooving and mortising. Features 2mm micrograin Tungsten Carbide tips, for cutting the most abrasive materials to give extra long life.D 1/2 inchD 12.7 mmC 38 mmShank Diameter 1/2 inch

Gives a clean finish to abrasive materials such as chipboard, MDF, plywood and certain hardwoods.D 12.7 mmC 50 mmOverall length 93 mmShank Diameter 1/2Please note: This cutter is especially suited for...

Gives a clean finish to abrasive materials such as chipboard, MDF, plywood and certain hardwoods.D 1/2 inchD 12.7 mmC 50 mmOL 93 mmShank Diameter 1/2 inch

Gives a clean finish to abrasive materials such as chipboard, MDF, plywood and certain hardwoodsD 1/2 inchD 12.7 mmC 63 mmOL 106 mmShank Diameter 1/2 inchPlease note: This cutter is especially suited for...

Trend weather seal designed to accomodate the popular Schlegel Aquamac 63 or Exitex Aquatex P6 weather strip system and allows for a particularly small gap between the sash and frame.D 41.3 mmD2 28.3 mmC...

Two flute 12.7mm diameter 50mm cut length.D 1/2 inchD 12.7 mmC 50 mmOL 99 mmShank Diameter 1/2 inchPlease note: This cutter is especially suited for drilling.

TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics.D 15 mmC 35 mmOL 76 mm

TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics.D 45/64 inchD 18 mmC 25 mmOL 67 mm

TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics.D 1 1/4 inchD 31.8 mmC 25 mmOL 67 mm

For coves and part of a rule joint.D 1 1/2 inchD 38.1 mmC 1 1/4 inchC 31.7 mmR 3/4 inchR 19.1 mm

This can be used for recessing circular hinges, accurate repetitive routing. This should be used with a template and guide bush fitted to the router base.D 35 mmOL 60 mm

Machining of traditional panels and frame doors, formerly done on spindle moulders, can now be performed with heavy duty routers mounted in fixed positions, either overhead or inverted. These Raised Panel...

Machining of traditional panels and frame doors, formerly done on spindle moulders, can now be performed with heavy duty routers mounted in fixed positions, either overhead or inverted. These Raised Panel...