A large version of a classic moulding for glazing bars, also popular for table and dresser top edge finishes.D 36 mmD2 16 mmC 33 mmR 20 mmShank Diameter 1/2 inch

Classic skirting board mould.D 37 mmC 40 mmB 16 mmR 13.5 mmShank Diameter 1/2 inch

Solid Carbide replaceable blades.D 1/2 inchD 12.7 mmC 49.5 mmOL 100 mmShank Diameter 1/2 inch

TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics.D 5/8 inchD 16 mmC 19 mmOL 60 mm

TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics.D 3/4 inchD 19.1 mmC 25 mmOL 67 mm

12mm radius Bead/nosing cutter.D 42.9 mmC 25.4 mmC2 40 mmR 12.7 mmShank Diameter 1/2 inch

These tools produce the same type of joint & use the same components as the combination PSC sets.D 46 mmD2 42 mmC 15 mmC2 6.3 mmB 22 mmR 10 mmShank Diameter 1/2 inchTimber thickness min. 21 mmTimber thickness...

Used for trimming plastic or plywood overlays.D 1/2 inchD 12.7 mmC 1 inchC 25.4 mmB 12.7 mmA 90 degreesOverall length 79.5 mmShank Diameter 1/2 inch

For coves and part of a rule joint. 1/2" Shank.D1 20 mmCut length 18 mmOverall length 57 mmR1 10 mm

These cutters are for Trend Craft Dovetail Jigs.D 19.1 mmC 25 mmOL 65 mmA 97 degreesShank Diameter 1/2 inch

Allows templates to be placed either on top or the bottom of the material, for ease of routing.

Template thickness should be 5mm thicker than cut length of cutter.Can be used to rout both tenons and housings.D 3/4 inchD 19.1 mmC 11.1 mmB 19.1 mm

A two fluted cutter to give a clean finish to the cut edges.Use only on professional routers with 80mm deep plunge and suitable one piece multi-slit collet to ensure safe cutter retraction into base.D...

Heavy duty arbor with spacers for 12mm bore slotters with or without bearings.OL 84.5 mmSpigot dia. 12 mmSpigot length incl thread 45 mmSpigot thread length 20 mmDiameter 18.5 mm

Recessing cutter will accommodate the Schlegel Aquamac 21 or Exitex Aquatex A10 seal.D 46.3 mmD2 34.3 mmC 10.3 mmC2 2.7 mmOL 90 mmB 28.6 mm