For coves and part of a rule joint with a 1/4" shank diameter.D 8 mmC 1/2 inchC 12.7 mmR 4 mmOL 46 mm

For producing ovolo and rounding over edge moulds, using a side fence or back fence.D 5/8 inchD 15.9 mmC 13.5 mmR 6.3 mmOverall length 57 mmShank Diameter 1/4 inch

The classic method of producing cabinet panelled door and drawer fronts is made easy with these Profile Scriber sets.D 41 mmC 17 mmC2 6.35 mmB 22 mmR 4 mmShank Diameter 1/4 inchOverall length 81 mmTimber...

Panel raiser cutters for producing the panel for cabinet panelled doors, tool matches our range of profile scribers.D 41 mmD2 7 mmC 12 mmR 12 mmOverall length 52 mmShank Diameter 1/4 inch

A one piece set. Parts are inter-changed on the arbor to alter the set-up. For use with router table only.D 41 mmC 6.35 mmB 22 mmShank Diameter 1/4 inchOverall length 75 mmTimber thickness min. 15 mmTimber...

These cutters are for use with the Nutool and Axminster Power Tool Centre Dovetail Jigs.D 12.7 mmC 12.7 mmOverall length 63 mmB 12.7 mmA 104 degreesShank Diameter 1/4 inch

A range of small sized panelling cutters. Ideal for veining and fluting applications.D 14.5 mmC 19.5 mmR 7.5 mm

Gives a clean finish to abrasive materials such as chipboard, MDF, plywood and certain hardwoods.Ideal for use with the Trend Hinge Jig.D 15/32 inchD 12 mmC 19 mmOverall Length 70 mmShank Diameter 1/4...

For housing, grooving and mortising. Features 2mm micrograin Tungsten Carbide tips, for cutting the most abrasive materials to give extra long life.D 12 mmC 19 mmShank Diameter 1/4 inch

For housing, grooving and mortising. Features 2mm micrograin Tungsten Carbide tips, for cutting the most abrasive materials to give extra long life.D 1/2 inchD 12.7 mmC 25 mmOverall Length 66 mmShank Diameter...

TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics.Two flutes give a clean finish to cut edges.All cutters above and including 9.5mm diameter, have TCT plunge centre...

For housing, grooving and mortising. Features 2mm micrograin Tungsten Carbide tips, for cutting the most abrasive materials to give extra long life.D 13/64 inchD 5 mmC 16 mmOL 71 mmShank Diameter 1/4 ...

For housing, grooving and mortising. Features 2mm micrograin Tungsten Carbide tips, for cutting the most abrasive materials to give extra long life.D 5/8 inchD 15.9 mmC 19 mmOL 60 mmShank Diameter 1/4...

Shank mounted bearing follows template mounted on board surface.It is advisable that the template is at least 5mm thicker than the cutter.D 22 mmC 1/2 inchC 12.7 mmB 22 mmR 4 mmR2 5.5 mm

3mm raidus Bead/nosing cutter.D 19 mmC 6 mmC2 22 mmR 3 mmShank Diameter 1/4 inch