TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics.Two flutes give a clean finish to cut edges.All cutters above and including 9.5mm diameter, have TCT plunge centre...

16mm radius Bead/nosing cutterD 50.8 mmC 32 mmC2 51 mmR 16 mmShank Diameter 1/2 inch

19mm radius Bead/nosing cutter

Ideal for shelves. Edge moulding applications only.D 22 mmC 25 mmB 16 mmR 3 mmShank Diameter 1/2 inch

For housing, grooving and mortising. Features 2mm micrograin Tungsten Carbide tips, for cutting the most abrasive materials to give extra long life.D 25/64 inchD 10 mmC 19 mmOL 63 mmShank Diameter 1/2...

For coves and part of a rule joint with 1/2" shank diameter.D 12.7 mmC 19 mmR 1/4 inchR 6.3 mmOL 56 mm

Gives a clean finish to abrasive materials such as chipboard, MDF, plywood and certain hardwoods.D 25/64 inchD 10 mmC 35 mmOL 78 mmShank Diameter 1/2 inch

For 4.0mm thick strip the TR42 is for 15.0mm wide intumescent strip.D 40 mmC 15 mmB 32 mmE 4 mmShank Diameter 1/2 inchFire check 45 minutes

A one piece set. Parts are inter-changed on the arbor to alter the set-up. For use with router table only.D 41 mmC 6.35 mmB 22 mmShank Diameter 1/2 inchOverall length 75 mmTimber thickness min. 15 mmTimber...

Self-guiding chamfer/bevel cutter.D 51 mmC 19 mmB 12.7 mmA 45 degreesOverall length 72.5 mmShank Diameter 1/2 inchFor stationary machines - Max 18,000rpm

A 'T' slot cutters for clamping and hanging applications.D 30 mmD2 10.5 mmC 7 mmR 3 mmA 119 degreesOverall length 55.5 mmShank Diameter 1/2 inch

Two fluted tungsten carbide weatherseal groover for use on natural timbers and manmade boards.D 36 mmC 2 mmOL 80 mmB 22 mmShank Diameter 1/2 inch

Two fluted tungsten carbide weatherseal groover for use on natural timbers and manmade boards.D 36 mmC 2.8 mmOL 80 mmB 22 mmShank Diameter 1/2 inch

These specially designed machine bits have a specially designed form of scriber to allow use at high speeds.D 35 mmOL 60 mmShank Diameter 1/2 inch Recommended speed 1000-20000 rpm

Gives a clean finish to abrasive materials such as chipboard, MDF, plywood and certain hardwoods.D 12 mmC 63 mmOL 100 mmShank Diameter 1/2 inch