Suitable for a wide range of applications such as engraving, grooving, rebating and shallow mortising.D1/4 inchD7.9 mmC3/4 inchC19.1 mmOverall length: 59.5 mmShank Diameter: 1/4 inchTwo flute carbide TCT...

TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics,Two flutes give a clean finish to cut edgesAll cutters above and including 9.5mm diameter, have TCT plunge centre...

Profiler with shank mounted bearing guides.D 1/2 inchD 12.7 mmC 32 mmB 12.7 mmA 90 degrees

Comprises of the 8mm diameter Craft Range cutter Ref. C011X1/4TC and 13mm plastic guide bush.This product includes: 1 x Straight 8mm (5/16" ) 1 x 13mm Template Guide Bush

For use with T5 and other compatible routers. Comprises a 1/8 inch down cut spiral router cutter Ref. S55/02LHX1/4STC, guide bush and inlay collar.Guide bush ID 4.8 mmGuide bush OD 7.9 mmCollar OD 14.28...

An initial cut with a straight cutter is required to produce the drawer pull profile.D 19 mmC 13 mmR 4 mmOverall Length 48 mmShank Diameter 1/4 inch

TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics.Two flutes give a clean finish to cut edges. All cutters above and including 9.5mm diameter, have TCT plunge centre...

This dovetail cutter produces a tight reliable joint for drawers, boxes etc.D 1/2 inchD 12.7 mmC 1/2 inchC 12.7 mmOverall length 60.5 mmA 104 degreesShank Diameter 1/4 inch

TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics.D 25/32 inchD 20 mmC 25 mmOL 57 mm

By raising the cutter, the top quirk is removed. Alternative bearing Refs. B95A & B127A.D 35 mmC 13.5 mmB 12.7 mmR 4 mmOverall length 65 mmShank Diameter 1/4 inch

Shank mounted bearing profilers are ideal for template guidance.

For producing ovolo and rounding over edge moulds, using a side fence or back fence.D 1/2 inchD 12.7 mmC 23/64 inchC 9 mmR 4.8 mmOverall length 51.5 mmShank Diameter 1/4 inch

Lip and spur dowel drills for use with the Trend Craft Dovetail Jig dowelling template.D 8 mmC 35 mmOL 70 mmShank length 23 mmShank Diameter 1/4 inch

This cutter is for Trend Craft Dovetail Jigs.D 12.7 mmC 20 mmOL 60 mmA 98 degreesShank Diameter 1/4 inch

Two flute TC cutter giving good chip clearance.D 3/4 inchD 19.1 mmC 19 mmOL 51 mmShank Diameter 1/4 inch