BASKET
0You have 0 items in your basket.
VAT total | £0.00 |
Total Goods (inc VAT) | £0.00 |
For housing, grooving and mortising. Features 2mm micrograin Tungsten Carbide tips, for cutting the most abrasive materials to give extra long life.D 1/2 inchD 12.7 mmC 25 mmOverall Length 66 mmShank Diameter...
Gives a clean finish to abrasive materials such as chipboard, MDF, plywood and certain hardwoods.D 12.7 mmC 50 mmOverall length 93 mmShank Diameter 1/2Please note: This cutter is especially suited for...
Gives a clean finish to abrasive materials such as chipboard, MDF, plywood and certain hardwoods.D 1/2 inchD 12.7 mmC 50 mmOL 93 mmShank Diameter 1/2 inch
Gives a clean finish to abrasive materials such as chipboard, MDF, plywood and certain hardwoodsD 1/2 inchD 12.7 mmC 63 mmOL 106 mmShank Diameter 1/2 inchPlease note: This cutter is especially suited for...
Two flute 12.7mm diameter 50mm cut length.D 1/2 inchD 12.7 mmC 50 mmOL 99 mmShank Diameter 1/2 inchPlease note: This cutter is especially suited for drilling.
Suitable for a wide range of applications such as engraving, grooving, rebating and shallow mortising.D 1/2 inchD 12.7 mmC 1 inchC 25.4 mmOL 68 mmShank Diameter 1/2 inch
Used for bevelling, chamfering & fluting.Diameter 1/2 inchDiameter 12.7 mmCut length 6.3 mmCut 2 13 mmOverall length 53 mmA 45 degreesShank Diameter 1/4 inch
Features 2mm micrograin Tungsten Carbide tips, for cutting the most abrasive materials to give extra long life. PTFE coated, indicated by distinctive black colouring.*¼" diameter shank *12.7mm x 25.4mm...
For trimming and bevelling timber, lippings and plastic laminate edges.D 1/2 inchD 12.7 mmC 50 mmOverall length 105 mmShank Diameter 1/2 inch
For trimming and profiling timber man-made board. Features 2mm micrograin Tungsten Carbide tips, for cutting the most abrasive materials to give extra long life.D 1/2 inchD 12.7 mmC 1 inchC 25.4 mmOverall...
These dovetail cutters produce a tight reliable joint for drawers, boxes etc.D 1/2 inchD 12.7 mmC 1/2 inchC 12.7 mmOL 56 mmA 104 degreesShank Diameter 1/4 inch
A keyhole recess for picture hanging flush to the wall.D 12.7 mmD2 8 mmS 4.6 mmC 4.9 mm
For trimming and bevelling timber, lippings and plastic laminate edges or any shaping applications. Self-guiding trimmer with bearings mounted on end of cutter. For trimming plastic or plywood overlay....
Profiler with shank mounted bearing guides.D 1/2 inchD 12.7 mmC 3/8 inchC 9.5 mmB 12.7 mmA 90 degrees
© Machine Mart 2024, All rights reserved.
Machine Mart Ltd 211 Lower Parliament Street, Nottingham NG1 1GN
Sorry, a problem occurred with the server. Please try again later.
Thank you, you will be emailed when this product comes back in stock.
Enter your email below to receive immediate notification when this item is back in stock.
Please enter an email address.
Please enter a valid email address.