BASKET
0You have 0 items in your basket.
VAT total | £0.00 |
Total Goods (inc VAT) | £0.00 |
Profiler with shank mounted bearing guides.D 1/2 inchD 12.7 mmC 1 inchC 25.4 mmB 12.7 mmA 90 degrees
Self-guiding cutters for rounding over edges do not require a side fence.D 57.1 mmC 1 inchC 25.4 mmB 9.5 mmB 12.7 mmR 22.2 mmShank Diameter 1/2 inch
Self-guiding chamfer/bevel cutter.D 32 mmC 1/2 inchC 12.7 mmB 9.5 mmA 45 degreesOverall length 60 mmShank Diameter 1/2 inch
Single flute helical for drilling and slotting, cutting aluminium anodised duralium and uPVC plastic.D 8 mmC 14 mmOL 80 mm
3 degree undercut router bit with shank mounted bearing guide for routing a leading edge on doors to allow a tight fit against jamb.D 24.2 mmC 50 mmA 93 degreesShank Diameter 1/2 inch
These cove style cutters with two flutes, give radiused grooves for decorative panel finishes and board edges.D 3/4 inchD 19.1 mmC 1/2 inchC 12.7 mmR 9.5 mmOverall length 51 mmShank Diameter 1/2 inch
These cove style cutters with two flutes, give radiused grooves for decorative panel finishes and board edges.D 1 inchD 25.4 mmC 5/8 inchC 15.9 mmR 12.7 mmOverall length 56.5 mmShank Diameter 1/4 inch
Useful for bevelling thick timbers.D 26 mmD2 12.7 mmC 35 mmC2 36 mmB 12.7 mmA 80 degrees
Self-guiding cutters for rounding over edges do not require a side fence.D 18.7 mmC 3/8 inchC 9.5 mmOL 49 mmB 9.5 mmB2 12.7 mmR 3 mm
Self-guiding cutters for rounding over edges do not require a side fence.D 24.7 mmC 12 mmOL 51 mmB 9.5 mmB2 12.7 mmR 6 mm
The two bearings supplied offer the means of cutting different depths of mouldings.D 63.5 mmC 1 inchC 25.4 mmB 12.7 mmB2 16 mmR 1 inchR 25.4 mm
For housing, grooving and mortising. Features 2mm micrograin Tungsten Carbide tips, for cutting the most abrasive materials to give extra long life.D 1/4 inchD 6.3 mmC 16 mmOL 59 mmShank Diameter 1/4 ...
For housing, grooving and mortising. Features 2mm micrograin Tungsten Carbide tips, for cutting the most abrasive materials to give extra long life.D 1/2 inchD 12.7 mmC 25 mmOL 93 mmShank Diameter 1/2...
These staff bead are ideal for producing nosings and attractive edges. Edge cut only. Ref. C068 can be used with Ref. C181 for dust proof joints.D 43 mmC 40 mmOverall length 3 5/64 inchOverall length 78...
Pack of three TR09 2-flute router cutters.D 10 mmC 19 mmOL 60 mmShank Diameter 1/4 inchPlease note: This cutter is especially suited for drilling.
© Machine Mart 2024, All rights reserved.
Machine Mart Ltd 211 Lower Parliament Street, Nottingham NG1 1GN
Sorry, a problem occurred with the server. Please try again later.
Thank you, you will be emailed when this product comes back in stock.
Enter your email below to receive immediate notification when this item is back in stock.
Please enter an email address.
Please enter a valid email address.