BASKET
0You have 0 items in your basket.
VAT total | £0.00 |
Total Goods (inc VAT) | £0.00 |
Cutter for use with the Leigh Dovetail Jig.D 1/2 inchD 12.7 mmC 9.5 mmOL 57 mmA 108 degreesShank Diameter 1/4 inch
These cutters are for use with the Nutool and Axminster Power Tool Centre Dovetail Jigs.D 12.7 mmC 12.7 mmOverall length 63 mmB 12.7 mmA 104 degreesShank Diameter 1/4 inch
For housing, grooving and mortising. Features 2mm micrograin Tungsten Carbide tips, for cutting the most abrasive materials to give extra long life.D 1/2 inchD 12.7 mmC 25 mmOL 66 mmShank Diameter 1/2...
For housing, grooving and mortising. Features 2mm micrograin Tungsten Carbide tips, for cutting the most abrasive materials to give extra long life.D 1/2 inchD 12.7 mmC 25 mmOverall Length 66 mmShank Diameter...
Gives a clean finish to abrasive materials such as chipboard, MDF, plywood and certain hardwoods.D 12.7 mmC 50 mmOverall length 93 mmShank Diameter 1/2Please note: This cutter is especially suited for...
Gives a clean finish to abrasive materials such as chipboard, MDF, plywood and certain hardwoods.D 1/2 inchD 12.7 mmC 50 mmOL 93 mmShank Diameter 1/2 inch
Gives a clean finish to abrasive materials such as chipboard, MDF, plywood and certain hardwoodsD 1/2 inchD 12.7 mmC 63 mmOL 106 mmShank Diameter 1/2 inchPlease note: This cutter is especially suited for...
Two flute 12.7mm diameter 50mm cut length.D 1/2 inchD 12.7 mmC 50 mmOL 99 mmShank Diameter 1/2 inchPlease note: This cutter is especially suited for drilling.
Suitable for a wide range of applications such as engraving, grooving, rebating and shallow mortising.D 1/2 inchD 12.7 mmC 1 inchC 25.4 mmOL 68 mmShank Diameter 1/2 inch
Used for bevelling, chamfering & fluting.Diameter 1/2 inchDiameter 12.7 mmCut length 6.3 mmCut 2 13 mmOverall length 53 mmA 45 degreesShank Diameter 1/4 inch
Features 2mm micrograin Tungsten Carbide tips, for cutting the most abrasive materials to give extra long life. PTFE coated, indicated by distinctive black colouring.*¼" diameter shank *12.7mm x 25.4mm...
For trimming and bevelling timber, lippings and plastic laminate edges.D 1/2 inchD 12.7 mmC 50 mmOverall length 105 mmShank Diameter 1/2 inch
For trimming and profiling timber man-made board. Features 2mm micrograin Tungsten Carbide tips, for cutting the most abrasive materials to give extra long life.D 1/2 inchD 12.7 mmC 1 inchC 25.4 mmOverall...
Solid Carbide replaceable blades.D 1/2 inchD 12.7 mmC 29.5 mmOL 89 mmShank Diameter 1/2 inch
© Machine Mart 2024, All rights reserved.
Machine Mart Ltd 211 Lower Parliament Street, Nottingham NG1 1GN
Sorry, a problem occurred with the server. Please try again later.
Thank you, you will be emailed when this product comes back in stock.
Enter your email below to receive immediate notification when this item is back in stock.
Please enter an email address.
Please enter a valid email address.