From Laser's motorcycle range, this Clutch Hub & Drum tool is suitable for use with all modern 6 speed Ducati motorcycles equipped with a dry clutch. This is an essential time saving tool.

Part of Laser's Motorcycle range, this tool provides one holding tool which stops the camshaft timing pulley rotating and the socket tool to loosen and tighten the cam pulley retaining ring nut.

This comprehensive set of threaded plugs is for use on many Triumph, BSA and Norton Classic motorcycles and is manufactured for the easy re-install of fork legs after repair work has been carried out....

The Laser 6127 is a pair of crows feet type wrenches designed to fit Ducati cylinder head nuts. The applications are extensive with the 14mm wrench being for post 2005 machines, and the 15mm wrench being...

The Laser rocker arm pin puller set, is used to extract the valve rocker pins on many Ducati models. A slide hammer is included plus three adaptors: M5, M6 and M7.

The Ducati Superbike Panigale models require an alternator cover puller, due to the high magnetic field of the alternator magnets in the casing; the Laser cover puller is made by Laser in Sheffield and...

Designed for use with Triumph motorcycles, the Laser 6278 is compatible with the Triumph Dayonta T595 955cc 1997-2006, Speed Triple 1050 2005-2015, Speed Triple 885 1997-1999, Speed Triple 955 1999-2004,...

The 6261 is part of the Laser range of motorcycle tools and is compatible with the following bikes:Ducati Diavel AMG ,Carbon, Cromo, Standard 2012-2015, Hypermotard Hyperstrada, SP, 110,1100S, ,1100SP,...

Tyre bead retainer tool to prevent the tyre bead from slipping when refitting the tyre to the wheel.

The Laser 6349 is designed for use with all Ducati multistrada models fitted with Sachs type forks. This tool can be driven by a 1/2"drive ratchet or a 27mm ring spanner and is completed with a robust...

The Laser 6356 is designed to be used with an impact gun to remove both rear and front fixings that have been over tightened or partially seized. This tool is designed to be used with Ducati Super Bike...

The Laser 6364 has been fitted with rubber O rings to protect the fork cap, and has been manufactured from machined T6 aluminium for added reliability and quality. This unit has been designed to be used...

The Laser 6794 is a fork cap designed for use with Ducati multistrada ohlins electronic shock absorbers. The tool is also manufactured from non marking POM material for added convenience.

The Laser 6930 is suitable for Harley Davidson motorcycles including twin cam models plus other makes, and benefits from a aluminium manufacture. This unit is completed with a cup design that allows for...

The Gunson G4055B Hi-Gauge Adaptor Kit 12mm has been designed to convert the thread on Colortune and Hi Gauge Compression Testers to fit most popular sizes of sparkplugs that are fitted to a variety of...