The Laser 6584 is designed for the removal of petrol injector using a side hammer on a T bar on 4.6 to 5.5L petrol engines. This model is suitable for use with M133, M152, M157, M270, M274, M276, and M278...

The Laser 6811 is a high pressure pump sprocket remover designed to remove the fuel pump sprocket on Hyundai/ Kia (2001 - 2016).

The Laser 6849 fuel pump drive belt kit has been designed for locking the fuel pump into its timed position, so that the pump drive belt can be replaced, or the pump timing checked. This model is ideal...

The Laser pipe connector insertion tool is an innovatively designed hand operated force tool combined with specifically machined adaptors to clamp the relevant fuel pipe and fit the connector in to the...

The Laser 6953 specifically caters for the Ecoboost range up to the 2.0 litre version, and is designed and manufactured by Laser in Sheffield. The machined split collet design fits over the injector securely...

The 6958 kit provides the special tools required to drill out the broken bolt and fit M6 threaded inserts to allow new OEM M6 bolts to be used.

Set includes flexible 3/8"Sq drive adaptor, hinged at both ends for ease of access to confined areas and 10-17mm crows foot injector pipe sockets. Supplied in a storage case.

The Laser 7038 is a petrol injector mover with a slide hammer for BMW (N43/N53/N54) (2.5/3.0lt) petrol engines.

The Laser 6192 is designed to remove locking rings on the following vehicles:Vauxhall/Opel Applications include: Antara from 2007, Astra-J from 2010, Insignia from 2009, SIGNUM 2003 to 2008, Vectra-C 2003...

The Laser 6152 is designed for removing diesel and petrol from fuel lines, and benefits from quick release connectors for PSA/Vauxhall/Opel vehicles.

Designed to charge the turbo system with a low pressure of regulated workshop air to show the presence of leaks within the system. The kit is supplied with four pairs of stepped adaptors to fit most sizes...