This gasket scraper is manufactured from carbon steel hardened, tempered and satin chrome finish with shot blast scraper end.

The Laser 6162 pre chamber removal adaptor and slide hammer kit for Mercedes Benz comes supplied with a double ended adaptor incorporating M22x1mm and M22x1.5mm threads in one adaptor. This tool is used...

The torque multiplier has a 1/2"Sq drive input and 3/4"Sq drive output. A torque multiplier is needed to remove and refit the crankshaft pulley bolt. Specially designed with the correct reduction ratio...

Universal seal puller for use on rubber ‘O’ rings, oil and grease seals. Particularly useful on commercial vehicle applications.

Set of forty-nine square edged heavy-duty steel drivers from Ø18mm to Ø74mm. Suitable for installation of bearings or seals without damaging the bearing, seal or housing. Adaptors can also be used in a...

The Laser 6250 is designed specifically to replace the engine sub-frame steady bushes on an extensive range of VAG models. If an ordinary puller were to be used, the two-part bush will jam in the steady...

Universal outside thread chaser to be used on shaft parts with external threads from 1.25" up to 5" outside diameter.

This bearing, seal and bush insertion and extraction kit, has been perfectly designed to aid with accurate and controlled insertion or removal of a host of different bearings, including normal bearings,...

This expert quality 180mm Clic and Clic-R Hose Clamp Tool by Draper is used to release and refit reusable hose clips. It is perfect for releasing and refitting clic and clic-R type metal hose clips that...

The Sealey CC230V uses cutting edge HHO engine cleaning technology. Each unit uses electrolysis to split water molecules into the composite elements of oxygen and hydrogen to produce oxyhydrogen or HHO...

Single part anaerobic securing compound, designed for fitting cylindrical metal assemblies and cures when confined between the parts. Will secure all types and sizes of bearings, shafts and cylindrical...

Checks vacuum operated systems on car and light commercials. Suitable for:Automatic transmission • Vacuum reservoirs • Air Conditioning & Heating • Heater Cones • Brake Systems (including ABS & Conventional)...

This kit can be used on cylinder heads, gearboxes, final drives, hubs and more and helps prevent drill wander which can cause extra damage to expensive components. This kit includes a size range of 8mm...

This ring compressor is constructed from spring steel with a steel adjusting key.