BASKET
0You have 0 items in your basket.
VAT total | £0.00 |
Total Goods (inc VAT) | £0.00 |
The BlueSpot 35 PCE Brake Caliper Kit is used to wind back brake caliper pistons when servicing brake caliper or replacing brake pads. The left and right hand threaded rewind tools allow the easy return...
The BlueSpot 4pcs Double Flaring Tool Kit is manufactured from carbon steel for increased durability. The flare kit produces SAE flares on 3/16" pipes. Suitable for use on steel pipes. Also suitable for...
The BlueSpot Brake And Clutch Bleeder uses the air from your workshop compressor to quickly and efficiently bleed brake and clutch systems. The main reservoir bottle has a 1 litre capacity and the suction...
The BlueSpot One Person Brake And Clutch Bleeder Kit enables the user to extract and replace brake fluid at the same time, using the air pressure from your spare tyre ( max 20PSI - 10PSI for older systems).The...
This system sets the standard for affordable brake and clutch bleeding systems. Using air pressure from an inflated spare tyre, it will effortlessly bleed hydraulic systems
This simple and effective tester shows the condition of brake fluid with a coloured response. Green indicates brake fluid is 1.5% water and Ok, whilst red indicates 3% water and fails the test. It has...
One-man pressure brake and clutch bleeding system suitable for the professional workshop. Low pressure tank (20-40psi) can be pre-charged with compressed air, making the unit fully portable. Large reservoir...
This set helps to locate problems relating to commercial vehicle air brake pressure quickly and easily. The three gauges provide more accurate diagnosis when testing and locating faults along the braking...
MOT Approved tool, which simplifies vehicle testing by allowing any test that requires the brakes to be applied to be carried out by one person rather than two.
This ingenious time saving tool, essential for any garage, measures the brake pad on the vehicle without removing the road wheel. The slim design enables the tool to locate the rear of the pad backing...
Eccentric flaring tool kit suitable for soft copper, aluminium tubes and complete with tube cutter and pipe reamer.
A one man pressure break and clutch bleeding system suitable for the professional workshop. The low pressure tank (20 - 40psi) can be pre-charged with compressed air, making the unit fully portable. This...
Specially designed for the removal of corrosion from brake and fuel pipes for fast and thorough inspection. Features 12 cleaning edges for different sizes and types of pipes. Includes curved cleaning edges...
The Sealey brake caliper repair kit saves time when replacing damaged brake caliper threads with a new threaded insert and includes three alignment plates to ensure the correct alignment of the insert.This...
This kit is designed to fit in the AP24 topchest, rollcab and workstation range and a selection from the Superline Pro range. This set features a reliable build making it ideal for use in both workshops...
© Machine Mart 2024, All rights reserved.
Machine Mart Ltd 211 Lower Parliament Street, Nottingham NG1 1GN
Sorry, a problem occurred with the server. Please try again later.
Thank you, you will be emailed when this product comes back in stock.
Enter your email below to receive immediate notification when this item is back in stock.
Please enter an email address.
Please enter a valid email address.