The BlueSpot 35 PCE Brake Caliper Kit is used to wind back brake caliper pistons when servicing brake caliper or replacing brake pads. The left and right hand threaded rewind tools allow the easy return...

The BlueSpot 4pcs Double Flaring Tool Kit is manufactured from carbon steel for increased durability. The flare kit produces SAE flares on 3/16" pipes. Suitable for use on steel pipes. Also suitable for...

The BlueSpot Brake And Clutch Bleeder uses the air from your workshop compressor to quickly and efficiently bleed brake and clutch systems. The main reservoir bottle has a 1 litre capacity and the suction...

The BlueSpot One Person Brake And Clutch Bleeder Kit enables the user to extract and replace brake fluid at the same time, using the air pressure from your spare tyre ( max 20PSI - 10PSI for older systems).The...

This system sets the standard for affordable brake and clutch bleeding systems. Using air pressure from an inflated spare tyre, it will effortlessly bleed hydraulic systems

When pressure bleeding brakes and clutch hydraulic systems, it is essential to prevent fluid and air being pulled back into the system via the bleed nipple when the pedal or lever is released. The Laser...

A Chrome Molybdenum pipe bender for making tidy bends in brake pipes.

This simple and effective tester shows the condition of brake fluid with a coloured response. Green indicates brake fluid is 1.5% water and Ok, whilst red indicates 3% water and fails the test. It has...

This Brake Flaring Tool Set is designed to be used in conjunction with a bench vice. The set comprises of 4 sizes of clamping blocks for holding the brake pipes (3/16”(4.75mm), ¼”, 5/16” & 3/8”) The Turn...

One-man pressure brake and clutch bleeding system suitable for the professional workshop. Low pressure tank (20-40psi) can be pre-charged with compressed air, making the unit fully portable. Large reservoir...

This set helps to locate problems relating to commercial vehicle air brake pressure quickly and easily. The three gauges provide more accurate diagnosis when testing and locating faults along the braking...

MOT Approved tool, which simplifies vehicle testing by allowing any test that requires the brakes to be applied to be carried out by one person rather than two.

The Laser 6084 is a 3 piece kit designed to allow a Dial Test Indicator (DTi) gauge to be mounted securely in position against the brake disc to measure disc warp. This kit is ideal for the measurement...

Makes bleeding brakes a simple, single person job.

The Laser ratchet and brake piston spreader works on single, twin and quad pistons. The ratchet evenly spreads the force making it fast and easy to use, and the handle ensures it also remains comfortable...