This compact push ram is suitable for many applications including workshop, agricultural, industrial, and construction where lifting, pushing, positioning, bending and holding of heavy loads may be required....

This compact push ram is suitable for many applications including workshop, agricultural, industrial, and construction where lifting, pushing, positioning, bending and holding of heavy loads may be required....

The Sealey RE91/10 is a spring return pull ram that is suitable for use with manual or air powered hydraulic pumps. This unit comes supplied with two chain hooks.

This compact pull ram is suitable for many applications including workshop, agricultural, industrial, and construction where lifting, pushing, positioning, bending and holding of heavy loads may be required....

This compact pull ram is suitable for many applications including workshop, agricultural, industrial, and construction where lifting, pushing, positioning, bending and holding of heavy loads may be required....

A replacement 100mm pull ring, suitable for use most pull clamps used in the vehicle bodywork repair trade.

This handy multi hole pull plate from Power-Tec is suitable for a range of dent pulling applications in the automotive repair industry. Simple to use, the plate can be bolted onto a chassis or bodywork...

This handy Midget Clamp from Power-Tec is has a 35mm wide jaw and is small enough to be used in hard to reach, tight areas, yet it still boasts a 4 ton pull capacity, making it ideal for various automotive...

Compatible with all types of jigs and pullers, this clever little device is used to convert direct pulls into a downward pull with minimum effort and fuss.

A right angle clamp with 6 ton pulling capacity, ideal for straight and right angle pulls and for use with body pulling equipment.

Ideal for a multitude of pulling tasks in the automotive bodywork repair industry, this pull hook set from Power-Tec has 300mm reach, 150mm depth and comes complete with small and large pull plates and...

Ideal for repairing dents in wheel arches on larger vehicles, this large arch hook simply hooks under the wheel arch, allowing for pulls without the risk of bulging or mis-shaping the wheel arch. Featuring...

Ideal for repairing dents in wheel arches on smaller vehicles, this small arch hook simply hooks under the wheel arch, allowing for pulls without the risk of bulging or mis-shaping the wheel arch. Featuring...

This 100mm G Clamp from Power-Tec allows for dent pulling at various angles. The clamp allows for 4 ton pulls, while the 100mm opening means the clamp can operate around, over or behind damage with ea...

A 50mm wide Scissor Clamp from Power-Tec with 3 ton pulling capacity. Suitable for a wide range of pulling applications.