This set is designed for the removal and insertion of front wheel bearings, and is suitable for use with all front wheel drive cars. Completing this set is a phosphate coating for corrosion resistance...

This 10 piece set allows for the easy installation of straight races and seals without damage to bearings or axle housing. This tool fits most standard wheel bearing sizes, including 4 x 4 vehicles. Insert...

These heavy duty CV Boot Clamp Pliers can be used by hand or with the assistance of a power bar if required. Also suitable for installation of certain clamps on fuel filters, water pumps and other cooling...

Designed for use on wishbone suspension using access points in the rear suspension arm, this Telescopic spring compressor from Clarke features two pairs of shaped yokes that prevent the coil from bowing,...

This CV Bootgun is designed for stretching flexible CV Boots on to the drive shaft assemblies of automotive vehicles. The tool works with an air compressor at 4-7bar and on a maximum diameter of 110mm...

This wheel bearing kit is an essential service tool for VAG (Volkswagen Audi Group) models fitted with 2nd generation wheel bearings. These second generation bearings can't be separated from the drive...

The Laser 6505 has been specifically designed to remove the radius arm to axle bush RBX101680 and radius arm to body bush RBX101730 on Range Rover Classic, Range Rover P38, Land Rover Discovery 1 and 2...

Part of Laser's Commercial Vehicle Range this 8 point socket is suitable for Volvo trucks front and rear axle covers.

This T50 Star bit from Laser is designed and manufactured specifically for use with Ford Transit vans. At 125mm, this bit is the perfect length for use on Ford Transit wheel bearings, providing the exact...

This tool allows the user to renew the CV boot of a vehicle without dismantling the CV joint. Manufactured from nylon with a 19mm hexagon bar fitted to the base.

A comprehensive set of Hub Nut sockets designed primarily for Volkswagen Audi Group vehicles.

This tool is used to spread the steering knuckle to enable the removal and refitting of shock absorbers without the risk of damage to the aluminium or cast iron knuckle. The tool is adjustable and is therefore...

A comprehensive set of strut nut tools that cover many applications.

Quality made tool designed to aid fast tensioning and securing of CVJ boot banding material. Simply insert banding, tension using winding mechanism, and then pull over lever to cut the band to length....

Clamp for strut insert pistons.