From Laser's motorcycle range, this 25mm front axle alignment tool is suitable for use on various Ducati models. The tool allows you to maintain correct alignment of the front axle while the axle nut is...

From Laser's motorcycle range, this Clutch Hub & Drum tool is suitable for use with all modern 6 speed Ducati motorcycles equipped with a dry clutch. This is an essential time saving tool.

From Laser's motorcycle range, these front and rear wheel sockets are suitable for use on a wide range of Ducati motorcycles. The tools will fit wheels with 30mm, 28mm or 55mm nuts and are essential wheel...

Part of Laser's motorcycle range, this handy tool removes alternator covers on various Ducati models without damage and fuss. This tool is essential when removing the left side engine casing on Multistrada,...

From Laser's motorcycle range, this must have service tool is used to remove the steering stem nut on various Ducati motorcycles, without damaging the nut. 3/8" Drive.

Part of Laser's Motorcycle range, this tool provides one holding tool which stops the camshaft timing pulley rotating and the socket tool to loosen and tighten the cam pulley retaining ring nut.

The Laser 6356 is designed to be used with an impact gun to remove both rear and front fixings that have been over tightened or partially seized. This tool is designed to be used with Ducati Super Bike...

From Laser's motorcycle range, this 30mm front axle alignment tool is suitable for use on various Ducati models. The tool allows you to maintain correct alignment of the front axle while the axle nut is...

The Ducati Superbike Panigale models require an alternator cover puller, due to the high magnetic field of the alternator magnets in the casing; the Laser cover puller is made by Laser in Sheffield and...

The 6261 is part of the Laser range of motorcycle tools and is compatible with the following bikes: Ducati Diavel AMG ,Carbon, Cromo, Standard 2012-2015, Hypermotard Hyperstrada, SP, 110,1100S, ,1100SP,...

The Laser 6127 is a pair of crows feet type wrenches designed to fit Ducati cylinder head nuts. The applications are extensive with the 14mm wrench being for post 2005 machines, and the 15mm wrench being...

The Laser rocker arm pin puller set, is used to extract the valve rocker pins on many Ducati models. A slide hammer is included plus three adaptors: M5, M6 and M7.

The Laser 6349 is designed for use with all Ducati multistrada models fitted with Sachs type forks. This tool can be driven by a 1/2”drive ratchet or a 27mm ring spanner and is completed with a robust...