30mm steel guide bush.Outside diameter 30 mmInner diameter 27 mmProjects from plate 10 mmPlate diameter 60 mmCsk screw hole centres 50 mmFor use with line up pin ref. WP-T9/090

Guide bush guides the router when using a template.Outside diameter 15.8 mmOutside diameter 5/8"Inner diameter 14 mmProjects from plate 6 mm ID 14 mmPlate diameter 60 mmCsk screw hole centres 50 mm

Guide bush guides the router when using a template.Outside diameter 1 1/16" (27 mm)Inner diameter 24 mmProjects from plate 6 mmPlate diameter 60 mmCsk screw hole centres 50 mm

Guide bush guides the router when using a template. For use with the CDJ300/01 Dovetail template.Outside diameter 7.8 mmProjects from plate 4 mmDiameter of plate 60 mmCsk screw hole centres 50 mm

Guide bush guides the router when using a template.Outside diameter 18 mmInner diameter 15 mmProjects from plate 6 mmPlate diameter 60 mmCsk screw hole centres 50 mm

Guide bush guides the router when using a template.Outside diameter 12 mmInner diameter 9 mmProjects from plate 6 mmPlate diameter 60 mmCsk screw hole centres 50 mm

Bearings are shielded to prevent penetration of dust and grease packed for life.They should not be cleaned with solvent or lubricated as this will dissolve the grease and cause premature bearing failu...

Bearings are shielded to prevent penetration of dust and grease packed for life.

Bearings are shielded to prevent penetration of dust and grease packed for life.

Guide bush guides the router when using a template.Outside diameter 16 mmInner diameter 13 mmProjects from plate 6 mmPlate diameter 60 mmCsk screw hole centres 50 mm

Bearings are shielded to prevent penetration of dust and grease packed for life.

Guide bush guides the router when using a template.Outside diameter 20 mmInner diameter 17 mmProjects from plate 6 mmPlate diameter 60 mmCsk screw hole centres 50 mm

Guide bush guides the router when using a template.Fits directly to Trend T3,T4,T5,T5 MK2, T9,T10 and T11, and some other light duty routers.Outside diameter 22 mmProjects from plate 4 mmPlate diameter...

Use of a bearing will govern the depth of cut without the need of a side-fence. The smaller the bearing, the deeper the cut.These bearings are shielded to prevent penetration of dust and grease packed...