Features 2mm micrograin Tungsten Carbide tips, for cutting the most abrasive materials to give extra long life.D 31.7 mmB 9.5 mmR 9.5 mmShank Diameter 1/4 inchIncludes extra bearing B127A for round over...

Ideal for fast chamfering to remove rough edges or create decorative edge on timber.D 1 1/4 inchesD 31.8 mmOverall length 62 mmB 9.5 mmA 45 degreesShank Diameter 1/4 inch

Includes different size bearings for a choice of rebate depths - 7.9mm, 9.5mm, 11.1mm & 12.7mm. Features 2mm micrograin Tungsten Carbide tips, for cutting the most abrasive materials to give extra long...

Enables biscuit joints to be cut in hard & soft wood, processed timbers etc. A choice of bearings ensures correct depth is cut for size of biscuit.D 29/64 inchD 37.2 mmC 4 mmB 12.7 mmShank Diameter 1/4...

For deep mortising & grooving giving good chip clearance.D1 16 mmCut length 50 mmOverall length 101 mmShank Diameter 1/2 inches

This five pack of C153 cutters give a clean finish to abrasive materials such as chipboard, MDF, plywood and certain hardwoods.

3° under cut router bit for routing the leading edges of timber doors to ensure a tight fit against door jamb

Profiler with shank mounted bearing guides.D1 1/2 inchD1 12.7 mmC 1/2 inchC 12.7 mmB 12.7 mmA 90 degreesOverall length 51 mmShank Diameter 1/4 inch

For housing, grooving and mortising. Features 2mm micrograin Tungsten Carbide tips, for cutting the most abrasive materials to give extra long life.D 1/4 inchD 6.3 mmC 16 mmOL 59 mmShank Diameter 1/4 ...

For housing, grooving and mortising. Features 2mm micrograin Tungsten Carbide tips, for cutting the most abrasive materials to give extra long life.D 1/2 inchD 12.7 mmC 25 mmOL 93 mmShank Diameter 1/2...

Fifteen piece cutter set, containing a range of popular cutters. 1 x Single Flute dia 4.8mm 3 x Two Flute dia 6.3mm, 12.7mm & 19mm 1 x Dovetail dia 12.7mm 2 x Guided Round Over radius 9.5mm & 12.7mm 1...

Pack of three TR17X1/2TC precision made TCT router cutters.D 1/2 inchD 12.7 mmC 50 mmOverall length 93 mmShank Diameter 1/2 inch

A pack of three top qualityTR17DX1/2TC precision made Tungsten Carbide Tipped router cutters.D 1/2 inchD 12.7 mmC 50 mmOverall length 93 mmShank Diameter 1/2 inchPlease note: This cutter is especially...

For housing, grooving and mortising. Features 2mm micrograin Tungsten Carbide tips, for cutting the most abrasive materials to give extra long life.Gives a clean finish to abrasive materials such as chipboard,...

Includes different size bearings for a choice of rebates - 7.9mm to 12.7mm diameters.D 1 3/8 inchD 35 mmC 1/2 inchC 12.7 mmB 9.5 mmB2 12.7 mmE 11.1 mmE2 12.7 mmOverall length 63 mmShank Diameter 1/2 i...