All slotters are precision made in TCT grade for long life when cutting the most abrasive materials.D 40 mmKerf 2.0 mmNo. of Teeth 2

This two wing self-guiding Tungsten Carbide Tipped slotting cutter is ideal for biscuit jointing.D 37.2 mmC 4 mmB 12.7 mmB2 16.0 mmB3 19.0 mmOverall length 63.5 mmShank Diameter 1/4 inchGroove depths 9.05...

For biscuit jointing of timber, man-made fibre and particle board with the router.D 40 mmC 4 mmB 15 mmB2 19 mmB3 23 mmShank Diameter 1/2 inch

Suitable for a wide range of applications such as engraving, grooving, rebating and shallow mortising.D 3/4 inchD 19.1 mmC 3/4 inchC 19.1 mmOverall length 59.5 mmShank Diameter 1/4 inch

For veining, panelling, 'V' grooving, bevelling & chamfering.D 1/2 inchD 12.7 mmC 7/16 inchC 13 mmC2 13 mmC3 11 mmA 60 degreesOverall length 53 mmShank Diameter 1/4 inch

For veining, panelling, 'V' grooving, bevelling & chamfering.D 1/2 inchD 12.7 mmC 1/2 inchC 13 mmC2 9 mmC3 6 mmA 45 degreesOverall length 53 mmShank Diameter 1/4 inch

By making a second pass at 90 degrees a full corner bead can be cut.D 28 mmD2 25.7 mmB 16 mmR 4.8 mmShank Diameter 1/4 inch

TCT cutter with staggered cutting surfaces.D 5/8 inchD 16 mmC 2 inchesC 50 mmOL 101 mmShank Diameter 1/2 inch

This two flute cutter gives a finer finish and has better plunge cutting characteristics.D 1/4 inchD 6.3 mmC 28 mmOL 63 mmShank Diameter 1/4 inch

A one piece bearing guided set. Parts are inter-changed on the arbor to alter the set-up.D 41 mmC 6.35 mmC2 10 mmE 22 mmOL 76 mmShank Diameter 1/2 inchTimber thickness min. 15 mmTimber thickness max. 22...

TCT cutter with staggered cutting surfaces.D 16 mmC 50 mmOL 103.0 mm

Panel mould and edge mould cutter.D 25 mmC 8 mmR 12 mm

Finger Jointer combines an assembley of five TCT slotting cutters with an abutting-edge cutter to produce a profile that extends the glue line threefold, resulting in an extremely strong joint.D 40 mmB...

This Comb Jointing Set can be fitted to all heavy duty routers mounted in a fixed head position. It comprises a set of five 4mm kerf, TCT groovers, mounted on an arbor and three ball bearings. These offer...

Suitable for a wide range of applications such as engraving, grooving, rebating and shallow mortising.D 8 mmC 25 mmOverall length 68.5 mmShank Diameter 1/4 inch