BASKET
0You have 0 items in your basket.
VAT total | £0.00 |
Total Goods (inc VAT) | £0.00 |
Profiler with shank mounted bearing guides.D 19.1 mmC 1 inchC 25.4 mmB 19.1 mmA 90 degreesOverall length 78 mmShank Diameter 1/2 inch
A one piece set. Parts are inter-changed on the arbor to alter the set-up. For use with router table only.D 41 mmC 6.35 mmB 22 mmShank Diameter 1/2 inchOverall length 75 mmTimber thickness min. 15 mmTimber...
A dovetail cutter for the Titan Dovetail jig with the 12 mm combD 5/8 inchD 15.9 mmC 14 mmOverall length 54 mmA 104 degreesShank Diameter 1/4 inch
Heavy duty arbor with spacers for 12mm bore slotters with or without bearings.OL 84.5 mmSpigot dia. 12 mmSpigot length incl thread 45 mmSpigot thread length 20 mmDiameter 18.5 mm
Suitable for a wide range of applications such as engraving, grooving, rebating and shallow mortising.D 11/16 inchD 17.5 mmC 1 inchC 25.4 mmShank Diameter 1/4 inchOL 65mm
For coves and part of a rule joint. 1/2" shank diameter.D 16 mmC 19.5 mmR 5/16 inchR 8 mmOL 57.5 mm
All slotters are precision made in TCT grade for long life when cutting the most abrasive materials.D 40 mmKerf 2.5 mmNo. of Teeth 2
All slotters are precision made in TCT grade for long life when cutting the most abrasive materials.D 40 mmKerf 2.0 mmNo. of Teeth 2
This two wing self-guiding Tungsten Carbide Tipped slotting cutter is ideal for biscuit jointing.D 37.2 mmC 4 mmB 12.7 mmB2 16.0 mmB3 19.0 mmOverall length 63.5 mmShank Diameter 1/4 inchGroove depths 9.05...
For biscuit jointing of timber, man-made fibre and particle board with the router.D 40 mmC 4 mmB 15 mmB2 19 mmB3 23 mmShank Diameter 1/2 inch
Suitable for a wide range of applications such as engraving, grooving, rebating and shallow mortising.D 3/4 inchD 19.1 mmC 3/4 inchC 19.1 mmOverall length 59.5 mmShank Diameter 1/4 inch
For veining, panelling, 'V' grooving, bevelling & chamfering.D 1/2 inchD 12.7 mmC 7/16 inchC 13 mmC2 13 mmC3 11 mmA 60 degreesOverall length 53 mmShank Diameter 1/4 inch
For veining, panelling, 'V' grooving, bevelling & chamfering.D 1/2 inchD 12.7 mmC 1/2 inchC 13 mmC2 9 mmC3 6 mmA 45 degreesOverall length 53 mmShank Diameter 1/4 inch
By making a second pass at 90 degrees a full corner bead can be cut.D 28 mmD2 25.7 mmB 16 mmR 4.8 mmShank Diameter 1/4 inch
TCT cutter with staggered cutting surfaces.D 5/8 inchD 16 mmC 2 inchesC 50 mmOL 101 mmShank Diameter 1/2 inch
© Machine Mart 2024, All rights reserved.
Machine Mart Ltd 211 Lower Parliament Street, Nottingham NG1 1GN
Sorry, a problem occurred with the server. Please try again later.
Thank you, you will be emailed when this product comes back in stock.
Enter your email below to receive immediate notification when this item is back in stock.
Please enter an email address.
Please enter a valid email address.