Set consisting of a three legged combination puller with an extra yoke for switching to two legged pulling. With reversible legs for internal and external grip. Chrome vanadium. Supplied in the unique...

The Draper N141/A is for use on Rover Group vehicles fitted with transverse 1100/1300cc power units with either diaphragm or verto clutches.

Gear puller with the option of 2 or 3 jaws and capable of pulling internally or externally.

6" Gear puller with the option of 2 or 3 jaws and capable of pulling internally or externally.

The Draper COPP/VW can be used for hooking under the ignition coil pack for easy removal.

Sealey Blind Bearing Removal Kit

This six piece puller set has been especially designed for removing stubbon injectors on Mercedes Benz vehicles fitted with CDi engines.

This tool is specifically designed for holding the sprocket/chain in place when disassembling the VP44 Injection Pump and high pressure pump common rail fitted to BMW engines M47, M47T2, M47TU, M57, M57TU...

This camshaft sprocket pulley puller has been specifically designed for use on Audi, Skoda and Volkswagen Audi V6 and V8 engines with 4 and 6 cylinders with 5 or 6 spoke camshaft pulleys. The three types...

Designed for pulling drive shafts into hubs or extracting the hubs on several manufacturer's vehicles

This Laser injector puller set is an essential tool for servicing diesel engines, specifically TDi and PD engines fitted to Volkswagen and Audi models. Simple to use, this is a time saving kit, a must...

Up to 40,000 miles the coil packs don’t want to budge in VW/Audi petrol cars. They sit deep down between the camshafts, access is difficult, and the tight fitting rubber boot will not easily come apart...

Designed for the removal of the steering drop arm from the steering box. This tool is designed for the Land Rover Defender, 90, 110, 130 1987-2006, and will ensure the shaft and oil seal remain even when...

Cast iron ductile body, steel force screw and tommy bar, the Universal Hub Puller is of a robust build, to remove even the most stubborn hubs. Suitable for four and five stud hubs, the Univeral Hub Puller...

The Laser 6165 is an internal bearing puller set supplied with chrome plated slide hammer with 300mm working shaft. This unit is also supplied with a chrome plated slide hammer with 300mm working shat...