This unique, hands free motorcycle spring compressor is a real time saver, ideal for use on various motorcycle springs. The compressor can also be use in situ on the bike, making this an ideal tool for...

Part of Laser's motorcycle range, this handy tool removes alternator covers on various Ducati models without damage and fuss. This tool is essential when removing the left side engine casing on Multistrada,...

From Laser's motorcycle range, this must have service tool is used to remove the steering stem nut on various Ducati motorcycles, without damaging the nut. 3/8" Drive.

From Laser's motorcycle range, this wrench is suitable for use on twin and single exhaust nuts fitted to bevel or gear driven engines made between 1970 and 1980.

From Laser's motorcycle range, this 30mm front axle alignment tool is suitable for use on various Ducati models. The tool allows you to maintain correct alignment of the front axle while the axle nut is...

From Laser's motorcycle range, this 25mm front axle alignment tool is suitable for use on various Ducati models. The tool allows you to maintain correct alignment of the front axle while the axle nut is...

From Laser's motorcycle range, these front and rear wheel sockets are suitable for use on a wide range of Ducati motorcycles. The tools will fit wheels with 30mm, 28mm or 55mm nuts and are essential wheel...

Part of Laser's Motorcycle range, this tool provides one holding tool which stops the camshaft timing pulley rotating and the socket tool to loosen and tighten the cam pulley retaining ring nut.

This comprehensive set of threaded plugs is for use on many Triumph, BSA and Norton Classic motorcycles and is manufactured for the easy re-install of fork legs after repair work has been carried out....

The Laser 6084 is a 3 piece kit designed to allow a Dial Test Indicator (DTi) gauge to be mounted securely in position against the brake disc to measure disc warp. This kit is ideal for the measurement...

The Laser 6127 is a pair of crows feet type wrenches designed to fit Ducati cylinder head nuts. The applications are extensive with the 14mm wrench being for post 2005 machines, and the 15mm wrench being...

The Laser rocker arm pin puller set, is used to extract the valve rocker pins on many Ducati models. A slide hammer is included plus three adaptors: M5, M6 and M7.

The Ducati Superbike Panigale models require an alternator cover puller, due to the high magnetic field of the alternator magnets in the casing; the Laser cover puller is made by Laser in Sheffield and...

Designed for use with Triumph motorcycles, the Laser 6278 is compatible with the Triumph Dayonta T595 955cc 1997-2006, Speed Triple 1050 2005-2015, Speed Triple 885 1997-1999, Speed Triple 955 1999-2004,...

The 6261 is part of the Laser range of motorcycle tools and is compatible with the following bikes:Ducati Diavel AMG ,Carbon, Cromo, Standard 2012-2015, Hypermotard Hyperstrada, SP, 110,1100S, ,1100SP,...