Japanese Industrial Standard screwdriver kit – T-Handle with 6 magnetic bits.For use on Japanese industrial standard screws fitted to classic Japanese motorcycles / cars / bicycles / equipment. The use...

Dual Valve Cycle Pump. Dual Head fits Schrader and Presta valves, includes mounting brackets and fixings. There is a pivoting handle for a better grip when pumping.

Owning your own workshop stand is essential for any keen home mechanic. This fully adjustable, and strong stand allows for the bike to be set at a comfortable working height. The clamp fits 20mm - 55mm...

Fixes into the frame in place of the rear wheel, being held in place by the bikes thru axle, keeping the chain tensioned and held away from the frame. The chain sits in a roller, which allows the cranks...

Tube cutter for fork steerer tubes, handlebars, seat posts, or any round tubing up to 31.75mm (1 1/4") diameter, this tool ensures a professional and accurate cut every time. The internal contact points...

Designed to remove and refit both Schrader and Presta type valve cores, this tool is a must when adding tyre sealant, fitting a Presta valve extender or replacing a valve core. Despite its small diameter,...

Recommended for use when lacing spokes into a bicycle wheel, this spoke nipple driver allows for nipples to be fitted and tightened through the wheel rim at speed due to its clever cranked design. The...

This chain wear indicator gauge should be used periodically to measure how much a chain has worn and stretched, ensuring it can then be replaced before it has caused any additional wear to the components...

Folding tool kit including a range of essential tools to carry out most road and trail side repairs. The ultra slim size of this alloy multi-tool means that it will easily fit into any saddle bag, back...

A wheel alignment gauge (dishing tool), is essential for ensuring the wheel sits correctly in the frame or forks by allowing you to check that the rim is centred between the locking nuts on either side...

For use on 3/32” chains, this chain tool is used to remove and install chain rivets. Both the main handle and T-handle of the driver have a cushioned grip, so are comfortable to hold when applying the...

Misaligned frame and fork dropouts cause many ride problems, including bent axles or quick-release skewers, together with tracking and gear shifting issues, due to the wheels not being able to fit correctly....

Ideal for both the keen home or workshop mechanic, this spoke tension gauge belongs next to any wheel truing stand. For use when building, rebuilding, or truing a bicycle wheel, it accurately measures...

Required for tightening or loosening spoke nipples a spoke wrench, sometimes referred to as a spoke key, allows for the tension in the wheel spokes to be adjusted so that the wheel runs straight and true....

This star nut setter is required for installing new star nuts into threadless fork steerers to the required depth and at a straight angle first time. As it is for use with a dead blow hammer, the handle...