Ideal for low-strength thread locking on adjusting screws, countersunk head screws and set screws. Very good on low strength metals which could break during disassembly.

Provides instant seals and cures rapidly. When fully cured it’s capable of sealing metal threaded joints up to 350 bar.

This easily applied flexible gasket paste forms a tough purple temperature resistant gasket. Its high viscosity and fast curing enables the paste to seal almost any size and shape creating an instant low...

This easily applied flexible gasket paste ideal for aluminium flanges forming a tough red, temperature resistant gasket. Its high viscosity and fast curing enables the paste to seal almost any size and...

The Draper D542 for metal threaded fittings especially useful on hydraulic pipes. Used on low, medium and high-pressure lines and cures to form a tough high-pressure seal.

The Draper D270 Stud Lock is a general purpose adhesive for permanent threaded assemblies. Secures studs up to 13mm, sealing against leakage and corrosion. Chemical resistant while also resisting fuels,...

This medium strength (16Nm break away) oil tolerant design for direct application onto parts where a light oily film exists or where surrounding parts contamination is a problem.

Instant gasket material forms in place, making almost any size and shape, replacing paper, cork etc. Once applied the assembled parts are usually suitable for immediate low pressure (6 bar) service and...

This two part, cold curing epoxy resin adhesive is suitable for bonding a wide range of surfaces including steel, aluminium, and galvanised iron. Reacts within five minutes to give a tough resilient b...

The Draper D572 Brake and Air Line Seal cures due to the absence of air between close fitting metal surfaces. Prevents loosening and leakage from shock and vibration. Good chemical/solvent resistance to...

The Draper D638 is designed to give high strength retention under cyclic loading. Retains full strength and won't suffer fatigue under load stress.

A toughened structural adhesive formulated for bonding differing substrates as well as unprepared metals, ceramics, wood, concrete and standard thermoset plastics. The final adhesive bond is designed to...