BASKET
0You have 0 items in your basket.
VAT total | £0.00 |
Total Goods (inc VAT) | £0.00 |
This universal adaptor allows the Clarke CHT857, brake & clutch bleeding kit to be used on master cylinders with reservoir cap diameters of 1-1/4” to 3-1/2”.
This tool is specifically designed for use on Citroen, Ford and Renault vehicles with brake calipers with a left handed threaded piston. A great time saving tool.
When pressure bleeding brakes and clutch hydraulic systems, it is essential to prevent fluid and air being pulled back into the system via the bleed nipple when the pedal or lever is released. The Laser...
This four piece flexi flare nut spanner set is constructed of mirror finished chrome vanadium and includes different sized wrenches making it ideal for various applications.Each spanner features one flexible...
A Chrome Molybdenum pipe bender for making tidy bends in brake pipes.
Handy set perfect for checking brake pad thickness. This set includes 3 colours which denote the wear Red: pad must be replaced immediately, Yellow: pad is becoming thin, Green: pad is in good working...
Disc brake servicing can be so much simpler using this devise for separating pistons in their callipers. Nicely made with adjustable blackened steel spreader plates, chromed screw & linking bar.
This simple and effective tester shows the condition of brake fluid with a coloured response. Green indicates brake fluid is 1.5% water and Ok, whilst red indicates 3% water and fails the test. It has...
For the controlled bending of pipework for brakes and other automotive applications, without the risk of crushing, this simple lightweight aluminium tool is the answer.
This flaring kit provides expert quality with the three sets of interchangeable forming blocks for rapid set up. For SAE convex, DIN convex and SAE double flaring on brake pipes. Performs single and double...
This Brake Flaring Tool Set is designed to be used in conjunction with a bench vice. The set comprises of 4 sizes of clamping blocks for holding the brake pipes (3/16”(4.75mm), ¼”, 5/16” & 3/8”) The Turn...
One-man pressure brake and clutch bleeding system suitable for the professional workshop. Low pressure tank (20-40psi) can be pre-charged with compressed air, making the unit fully portable. Large reservoir...
This set helps to locate problems relating to commercial vehicle air brake pressure quickly and easily. The three gauges provide more accurate diagnosis when testing and locating faults along the braking...
This can be used for SAE convex, DIN convex, 37° double and SAE double flaring on brake pipes. Performs single and double flares with ease.
MOT Approved tool, which simplifies vehicle testing by allowing any test that requires the brakes to be applied to be carried out by one person rather than two.
© Machine Mart 2024, All rights reserved.
Machine Mart Ltd 211 Lower Parliament Street, Nottingham NG1 1GN
Sorry, a problem occurred with the server. Please try again later.
Thank you, you will be emailed when this product comes back in stock.
Enter your email below to receive immediate notification when this item is back in stock.
Please enter an email address.
Please enter a valid email address.