For decorative panel and veining work.D 3/8 inchD 9.5 mmC 7.5 mmR 4.8 mmOverall length 47.5 mmShank Diameter 1/4 inch

For housing, grooving and mortising. Features 2mm micrograin Tungsten Carbide tips, for cutting the most abrasive materials to give extra long life.D 15/64 inchD 6 mmC 16 mmOL 56.5 mmShank Diameter 1/4...

A dovetail cutter for the Titan Dovetail jig with the 12 mm combD 5/8 inchD 15.9 mmC 14 mmOverall length 54 mmA 104 degreesShank Diameter 1/4 inch

This two wing self-guiding Tungsten Carbide Tipped slotting cutter is ideal for biscuit jointing.D 37.2 mmC 4 mmB 12.7 mmB2 16.0 mmB3 19.0 mmOverall length 63.5 mmShank Diameter 1/4 inchGroove depths 9.05...

Suitable for a wide range of applications such as engraving, grooving, rebating and shallow mortising.D 3/4 inchD 19.1 mmC 3/4 inchC 19.1 mmOverall length 59.5 mmShank Diameter 1/4 inch

For veining, panelling, 'V' grooving, bevelling & chamfering.D 1/2 inchD 12.7 mmC 7/16 inchC 13 mmC2 13 mmC3 11 mmA 60 degreesOverall length 53 mmShank Diameter 1/4 inch

For veining, panelling, 'V' grooving, bevelling & chamfering.D 1/2 inchD 12.7 mmC 1/2 inchC 13 mmC2 9 mmC3 6 mmA 45 degreesOverall length 53 mmShank Diameter 1/4 inch

By making a second pass at 90 degrees a full corner bead can be cut.D 28 mmD2 25.7 mmB 16 mmR 4.8 mmShank Diameter 1/4 inch

This two flute cutter gives a finer finish and has better plunge cutting characteristics.D 1/4 inchD 6.3 mmC 28 mmOL 63 mmShank Diameter 1/4 inch

Panel mould and edge mould cutter.D 25 mmC 8 mmR 12 mm

Suitable for a wide range of applications such as engraving, grooving, rebating and shallow mortising.D 8 mmC 25 mmOverall length 68.5 mmShank Diameter 1/4 inch

Self-guiding 45° chamfer/bevel cutter.D 32 mmC 1/2 inchC 12.7 mmB 9.5 mmA 45 degreesOverall length 62 mmShank Diameter 1/4 inch

Suitable for a wide range of applications such as engraving, grooving, rebating and shallow mortising.D1/4 inchD7.9 mmC3/4 inchC19.1 mmOverall length: 59.5 mmShank Diameter: 1/4 inchTwo flute carbide TCT...

TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics,Two flutes give a clean finish to cut edgesAll cutters above and including 9.5mm diameter, have TCT plunge centre...

Profiler with shank mounted bearing guides.D 1/2 inchD 12.7 mmC 32 mmB 12.7 mmA 90 degrees