TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics.D 63/64 inchD 25 mmC 25 mmOL 65 mm

TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics.Two flutes give a clean finish to cut edges.All cutters above and including 9.5mm diameter, have TCT plunge centre...

For biscuit jointing of timber, man-made fibre and particle board with the router.D 40 mmC 4 mmB 15 mmB2 19 mmB3 23 mmShank Diameter 1/2 inch

These specially designed machine bits have a specially designed form of scriber to allow use at high speeds.D 35 mmOL 60 mmShank Diameter 1/2 inch Recommended speed 1000-20000 rpm

To increase gluing area producing a strong joint in drawer production.D 25.4 mmC 12.7 mm

These cove style cutters with two flutes, give radiused grooves for decorative panel finishes and board edges.D 1 inchD 25.4 mmC 5/8 inchC 15.9 mmR 12.7 mmOverall length 54.5 mmShank Diameter 1/2 inch

For coves and part of a rule joint. 1/2" shank diameter.D 16 mmC 19.5 mmR 5/16 inchR 8 mmOL 57.5 mm

TCT cutter with staggered cutting surfaces.D 5/8 inchD 16 mmC 2 inchesC 50 mmOL 101 mmShank Diameter 1/2 inch

A one piece bearing guided set. Parts are inter-changed on the arbor to alter the set-up.D 41 mmC 6.35 mmC2 10 mmE 22 mmOL 76 mmShank Diameter 1/2 inchTimber thickness min. 15 mmTimber thickness max. 22...

TCT cutter with staggered cutting surfaces.D 16 mmC 50 mmOL 103.0 mm

Finger Jointer combines an assembley of five TCT slotting cutters with an abutting-edge cutter to produce a profile that extends the glue line threefold, resulting in an extremely strong joint.D 40 mmB...

This Comb Jointing Set can be fitted to all heavy duty routers mounted in a fixed head position. It comprises a set of five 4mm kerf, TCT groovers, mounted on an arbor and three ball bearings. These offer...

Used for trimming plastic or plywood overlays.D 1/2 inchD 12.7 mmC 50 mmB 12.7 mmA 90 degreesOverall length 104.5Shank Diameter 1/2 inch

Self-guiding cutters for rounding over edges do not require a side fence.D 32 mmC 16 mmB 9.5 mmB2 12.7 mmR 9.5 mm

Self-guiding cutters for rounding over edges do not require a side fence.D 42.7 mmC 22.3 mmOL 70 mmB 9.5 mmB2 12.7 mmR 15 mm